- Reaction score
- 9
what questions you guys struggling with in particular? Just send me a message and I’ll help as best as I can.
Discuss Teeside HNC Electrical and Electronic Engineering in the Electrical Engineering Chat area at ElectriciansForums.net
I can help you both as I've completed just let me know in a conversation..
what questions you guys struggling with in particular? Just send me a message and I’ll help as best as I can.
All good man This one is a pig to be honest, the content is in the lesson notes to get you through it, but you really do need to siege through the crap for the equations/methods to answer them. Synethesis of the complex waveform took me a few weeks or researching software which could do it and I can let you know what it is etc when on itThanks guys I took a short break to start DCS but should really get EEP3 finalized, I'll be in touch soon when I read back over it. Cheers.
No sorry, was looking at it though because I need to start my next module, not sure what to go for tbh.Have you completed DCS module Gizzy?
Hi Hilldog,It’s not too bad but as I said there’s not really any additional information that I can find that provides further background. All of the answers seem to be in the book but I’m just very cautious about copying directly. I’ve not handed anything in yet so not sure what they’re looking for really. I had a question on the pneumatics module TMA that was exactly the same as one of the questions in the earlier self assessments. I copied their answer word for word and got marked down for providing too short an answer.
I know what you are saying. It’s hard to not just copy from the books word for word! There’s no other info anywhere that I can see.
Think once it comes back as passed they’ll inform you so you can purchase your first module or you can call up the tuole admin team and ask to be enrolled onto it (easier in my opinion as they are very helpful normally)I've completed the maths bridging module and submitted my results over a week ago, how do i progress onto beginning the full HNC?
Think once it comes back as passed they’ll inform you so you can purchase your first module or you can call up the tuole admin team and ask to be enrolled onto it (easier in my opinion as they are very helpful normally)
Hello mate I have been stuck on the EEP Module for quite some time now, I have made a start but was just wondering if I could get you to check to see if I’m on the right track as don’t want to submit it and get a wrong markHi guys,
I just finished my EEP module and managed to get a distinction overall. The telephone interview was a lot easier than I thought, tutor actually congratulated me on my distinction. If I can help anyone out get in touch, PM me. Thanks.
Lighting unit is easyFinally submitted EEP 3!
I now need to choose my final optional unit before the Project.
What is the easiest optional unit other than DCS so I can get it over with ASAP?
Cheers!
Hello mate I have been stuck on the EEP Module for quite some time now, I have made a start but was just wondering if I could get you to check to see if I’m on the right track as don’t want to submit it and get a wrong mark
[automerge]1567268019[/automerge]
Lighting unit is easy
has anyone done applications of pneumatics and hydraulics? stuck on tma1 q4 and q7 about modifying the circuits?
I did that one last week ! Luckily my spare was good and I managed to change it at the roadside...has anyone done applications of pneumatics and hydraulics? stuck on tma1 q4 and q7 about modifying the circuits?
I did that one last week ! Luckily my spare was good and I managed to change it at the roadside...
Yes I did itHi guys, just applied for this course and they said I have to do the maths bridging module first? Did anyone else on here have to do it?
Perhaps I shouldnt mentioned I am an electrician ?
Cheers
Sam
Hi Lester,Hi There. A bit about myself, Im a time served electrician self employed for around 20 years. As time went by the knees started to play up, so hung up the tools and started working for a large electronics manufacturing company working as an electrical safety engineer. My qualifications as it stands are: 2330 L3, 2394, 2395, 18th, 2919, 2377. I have always wanted to undertake the HNC, but with work and family commitments back then, I put it on hold. I am now 41 with grown up kids and a little spare time. I approached my company and asked if they would support me financially through the HNC, and they agreed. I contacted Teesside to undertake the HNC via distance learning. I have been accepted on the course but you have probably already guessed it, ill have to complete the bridging math course before i can start the HNC. I have been given 6 months to complete this math course. My question is, how long did it take you guys to complete the bridging math course? I enjoy maths but its been a while. I did a GCSE equivalent higher paper through the OU around 5 years ago (just so i'm up to speed when it came to the kids maths home work)
struggling on DCS TMA1 question 3
Produce a sketch to show the construction of the data words on the data highway.
any help is appreciated.
Kind Reading
Gizzy
did you complete this question? currently can't find anything in course notesAnyone completed DCS Assignment 2, Question 5?
Using the information below, produce a set of calibration figures for the control loop TICA1945.
T11495 Range = 100 to 420 degrees c
TICA1495 SP = PV = 300 degrees c
TCV1495 = 30%
Struggling with this one can’t find anything similar in the lesson material.
Hi Connor.Hi Lester,
Welcome to the group and best of luck with the studies ahead!
I helped my work colleague through his maths bridge (I fortunately didn't have to do it for mine!) it is aimed I'd say just higher than gcse maths. You do a bit of stuff with algebra, trigonometry, calculus (hardest thing you might not have done) and statistics I believe. We smashed through it in about a month to 2 months and that was solely him with a little bit of guidance from me when it came to the TMAs. The lesson notes are very good and will easily get you through it!
And regardless you have a good group here who do try to help each other out so any issues just give us a shout. I'm quite active on the forum so feel free to message me.
Connor
Takes on average 1 to 3 weeks to get assessments marked to be fair. The forums are dead, ones like this and there's a good Facebook one which are much more active. You can literally start the next module as soon as they confirm the bridging module is complete. Just call the engineering team for the course and pay for the first moduleJust finished the maths bridging course. Not bad at all, really enjoyed the calculus part.
It seems a bit like a ghost town on the student forum at teeside, seems like i was the only student on the course!. Have not heard from anyone not even the tutor. I feel that i'm in for a shock (hnc course), the maths on the bridging course, i would say was GCSE higher paper with a little basic calculus. I submitted the three TMAs lats week and not heard from anyone, how long does it take before i can start the HNC after the maths course? really keen to get this started.
Just finished the maths bridging course. Not bad at all, really enjoyed the calculus part.
It seems a bit like a ghost town on the student forum at teeside, seems like i was the only student on the course!. Have not heard from anyone not even the tutor. I feel that i'm in for a shock (hnc course), the maths on the bridging course, i would say was GCSE higher paper with a little basic calculus. I submitted the three TMAs lats week and not heard from anyone, how long does it take before i can start the HNC after the maths course? really keen to get this started.
Reply to Teeside HNC Electrical and Electronic Engineering in the Electrical Engineering Chat area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.