C
Conchur
Hi guys me and my partner have recently moved into a new property that us an immersion heater switch for warm water , problem is one of us always forgets to turn it off and it just burns through the electricity so therefore I bought a digital timer so it can be set when to come on and go off so we save money ,
I turned electric off at mains and took the immersion switch off and it has 3 live red wires going into switch and an earth screwed to the metal housing , now the digital timer I bought has connections for 1. Neutral 2.live from mains and 3.live output to appliance 4. Not used, as it says .
Bought from screwdix king shield socket box timer 7 day electronic , any ideas how I fit this together as I'm not to sure and any advice greatly appreciated , the immersion seitch currentlynfitted has a layout of com L1 , L1 , l2
Thanks very much guys not sure if I can upload pictures with being a new member but if required I can no problem , cheers again
I turned electric off at mains and took the immersion switch off and it has 3 live red wires going into switch and an earth screwed to the metal housing , now the digital timer I bought has connections for 1. Neutral 2.live from mains and 3.live output to appliance 4. Not used, as it says .
Bought from screwdix king shield socket box timer 7 day electronic , any ideas how I fit this together as I'm not to sure and any advice greatly appreciated , the immersion seitch currentlynfitted has a layout of com L1 , L1 , l2
Thanks very much guys not sure if I can upload pictures with being a new member but if required I can no problem , cheers again