Any decent lug crimpers for 10mm onwards?

[ppelec100]

I’ve got some lug crimping tool called iwiss off Amazon and when crimping a 10mm cable into a lug I had to use 10mm on one side and 6mm on the other side of the crimper. Not sure how well it will work when it gets to bigger cables .

Are there any decent lug crimpers at a reasonable price?

 

[SparkySy]

I have a set of these that I've had for years, can't go wrong!

6.0mm² - 25mm² Ratchet Crimp Tool

 

[ppelec100]

I have a set of these that I've had for years, can't go wrong!

6.0mm² - 25mm² Ratchet Crimp Tool

Anything with a bigger range? Maybe up to 50mm or more...

 

[SparkySy]

I have a set of these for bigger sizes up to 50mm
They are ok but can be a pain in tight enclosures due to their size.

https://www.onbuy.com/gb/swa-ct650h-mechanical-crimping-tool-hexagonal-6mm-50mm~c12788~p57461859/?exta=gshp&stat=eyJpcCI6IjcxLjQ1MDAiLCJkcCI6bnVsbCwibGlkIjo4MDgxNDQ4MCwicyI6bnVsbCwidCI6MTY1MTE2MTg0MywiYm1jIjowfQ==&gclid=CjwKCAjwjtOTBhAvEiwASG4bCDRbzV1rRAN4fPgQCyXU173_RoTFJ3h_xM-OEcqlayNS78h3DtcvAxoC1_MQAvD_BwE

I also have the bigger set that do up to 150mm!

Also got a set of these that are better for tight spots!

Crimping Tool For Copper Tube Terminals 10.0 - 120.0mm² - CRT 25

Crimping Tool For Copper Tube Terminals 10.0 - 120.0mm²

www.cablecraft.co.uk

 

[ppelec100]

Okay

I have a set of these for bigger sizes up to 50mm
They are ok but can be a pain in tight enclosures due to their size.

https://www.onbuy.com/gb/swa-ct650h-mechanical-crimping-tool-hexagonal-6mm-50mm~c12788~p57461859/?exta=gshp&stat=eyJpcCI6IjcxLjQ1MDAiLCJkcCI6bnVsbCwibGlkIjo4MDgxNDQ4MCwicyI6bnVsbCwidCI6MTY1MTE2MTg0MywiYm1jIjowfQ==&gclid=CjwKCAjwjtOTBhAvEiwASG4bCDRbzV1rRAN4fPgQCyXU173_RoTFJ3h_xM-OEcqlayNS78h3DtcvAxoC1_MQAvD_BwE

I also have the bigger set that do up to 150mm!

Also got a set of these that are better for tight spots!

Crimping Tool For Copper Tube Terminals 10.0 - 120.0mm² - CRT 25

Crimping Tool For Copper Tube Terminals 10.0 - 120.0mm²

www.cablecraft.co.uk

Okay thanks for the link. I saw this on Amazon decent price. Has it done you well? Are the lugs accurate? (Not like my half 10mm half 6mm crimper)

 

[SparkySy]

Yes mine are the SWA brand ones from Edmondsons years ago probably at least 10! They have been great, just sometimes in tight places they can be a pain as the crimp head is quite large and the handles need to open a reasonable distance, once the lug is in the handles aren't so much of a problem.
There is very little ware in the dies and they still make a good solid connection, done hundreds of lugs over the years!

 

[ppelec100]

Yes mine are the SWA brand ones from Edmondsons years ago probably at least 10! They have been great, just sometimes in tight places they can be a pain as the crimp head is quite large and the handles need to open a reasonable distance, once the lug is in the handles aren't so much of a problem.
There is very little ware in the dies and they still make a good solid connection, done hundreds of lugs over the years!

Okay thanks mate, they seem about the same size as the ones I got.

 

[SparkySy]

No problem at all!

'Not enough characters'

 

[pc1966]

I got one of these for the occasions I need to crimp lugs on larger cables:

Crimp Tool Kit with Copper Tube Terminals

Kit comprising of:

www.cef.co.uk

It works quite well and handy to have the selection in the kit. However, you really need 3 or 4 hands, two to operate the handles and one or two to hold the crimp on the cable. The flare of the 'SWA brand' lugs helps a bit as you can partly close the tool and then push the held lug on to stiffer cable situations, but not ideal.

EDIT: I think this is the same basic tool as @SparkySy linked to.

 

[SparkySy]

@pc1966 has a point about needing 3 hands! I tend to get in a position where I can put one handle against something, the panel, wall or hip, thigh you know whatever it will stay against without slipping. This leaves a spare hand to get things lined up properly.