Bad customers/clients who wont pay...

[nick182]

A big THANK YOU to all those who have given me advice and support on what to do.. I really cant thank you all enough..

cheers guys.

 

[dcelectrical]

if we started a members only site and the only way to access the bad payers list was to insert your enrolement numbers it would keep out said people, we could use disclaimers of it is the opinion of electrician X that mr tightwad of 22 out to screw you Drive is a person not of correct paying nature and should be compared to eating sandwiches at the beach

 

[WDMDL]

I like that! Now is it the micro bore first and then the foam around it?

15mm is better for a normal motorist, it will let them pull off before choking the exhaust. Try and accelerate and then your bu**ered!

Mind you with some of the little boy racers around here 22mm would be better, give them a bit more rope.

• Open car
• Sit in car
• Switch on boom box
• Start engine
• Rev the bo%%cks off it
• Reverse and try to pull a doughnut in the road
• Foot hard down and head to a blind junction

With enough back pressure the exhaust will explode! (With any luck).

I wonder how I know about that?

Microbore first... otherwise it too will fill with foam. And you can't put too much foam in either.
Having said that, if the rear silencer is very close to the end of the exhaust, those perforated tubes provide an excellent surface for the foam to key to, even if they are coated with soot

Simon.

 

[nick182]

hmmm if only my client had a car.

 

[telectrix]

pushbikes have brakes.....