Battery tools.

[liddley]

Just out of interest do people use their own battery gear (combi drill/ impact/circular saw ) ect.. if you are employed( PAYE) or does the company supply them for you to use. Obviously hand tools and such have always been a requirement for employees to have them selves but just wondered if its the normal theses days to be expected to have battery tools also?

 

[Dustydazzler]

I only ever served as an employee sparks to one company and yes they provided us with all power tools and some hand tools. I also had my own hand tools as well and my own 18v drill i sometimes used as i prefered it to the one they gave me

 

[freddo]

Just out of interest do people use their own battery gear (combi drill/ impact/circular saw ) ect.. if you are employed( PAYE) or does the company supply them for you to use. Obviously hand tools and such have always been a requirement for employees to have them selves but just wondered if its the normal theses days to be expected to have battery tools also?

We are PAYE and supply all our own hand tools and ~95% of power tools, test equipment and ladders/step ladders. We don't get a tool allowance.

 

[UNG]

We are PAYE and supply all our own hand tools and ~95% of power tools, test equipment and ladders/step ladders. We don't get a tool allowance.

While not getting a tool allowance as such are you getting a better hourly rate for going more or less fully equipped. I'm wondering what you are expected to supply power tool wise, drilling machines and impact screwdrivers are everyday items but after that you can get into some expense for power tools that are not often used. Then you get to test equipment I don't like to add up the value of test kit I own and add to that the calibration costs, then with ladders and steps you get what you pay for and then the worst bit is all the wear and tear that has to be covered
I'm assuming you claim against your tax for all this equipment and it's wear and tear

 

[ElectroChem]

Theoretically, if I asked my boss he'd supply a basic set of power tools.
No way is he going to stump up the $5000+ in tools and meters I carry in my work vehicle. Plus, I have my own preferences for how I like to run my setup, and this way if I move on to another position, I don't need to stress over whether the new boss will work the same way.
EDIT: I should add that I am an absolute tool tart, and 9/10 guys at my work don't carry the variety of stuff I do. The company has hammer drills, circular saws etc for our use if needed, I just like having my own.

 

[freddo]

While not getting a tool allowance as such are you getting a better hourly rate for going more or less fully equipped. I'm wondering what you are expected to supply power tool wise, drilling machines and impact screwdrivers are everyday items but after that you can get into some expense for power tools that are not often used. Then you get to test equipment I don't like to add up the value of test kit I own and add to that the calibration costs, then with ladders and steps you get what you pay for and then the worst bit is all the wear and tear that has to be covered
I'm assuming you claim against your tax for all this equipment and it's wear and tear

I'm at the low end compared to the rates that have been posted in various threads on this forum. Work would supply some basic power tools, but they are big, heavy, low powered and use NiMH batteries orm110V. Drill bits blunt after a couple of uses etc. I'm glad they supply infrequently used tools such as core drills, portable generator etc. Having to share ladders is impractical, It's surprising how often I need the extension ladders. It would waste a lot of time having to keep loading them in and out of the stores. No I don't claim anything.

 

[liddley]

I presuming its only the self employed that can claim for use of own tools not the PAYE on the books guys?

 

[telectrix]

I presuming its only the self employed that can claim for use of own tools not the PAYE on the books guys?

paye empoyees can claim any expense that they incur to perform their job. e.g. you can claim the costs of washing your work clothing.

 

[liddley]

It never occurred to me that claiming expenses back when on the books was possible, this I will have to look into...

 

[liddley]

So if using your own battery gear do any of you guys get wear and tear money for repairing and renewing it when it fails.
I have to supply all my battery stuff and have done while working for the current company for last 4 years. I have a good selection of 18v makita gear but its starting to get tired now. I use it and am expected to let the company apprentice use it because obviously they have nothing when just starting out, so it gets some hammer. I am now thinking that having a couple new battery's bought by the firm or repairs done drill drivers ( new brushes ext.) Wouldn't be out the way. Or am I expecting to much ???