S
schoe
Just out of interest if i was to fit a new dual rcd split board and a came across a borrowed netural on a lighting circuit how could i resolve it?
Thanks Chris
Thanks Chris
Discuss Borrowed neutral question. in the Australia area at ElectriciansForums.net
Hence competent persons onions: or shall we just be like america and prevent anyone swapping like for like (old for new) fronts etc....Its up to the homeowner after all whether they employ anyone to do the work for them or not........telectrix that is fair enough because you are giving somebody/homeowner information they need to know because changing a fuse is within there capabilitys, but anybody who is removing the switch should have sufficient knowledge.
so you dont have a duty (moral or otherwise) to forwarn anyone else coming after you (competent persons) of this scenario?..........unless competent in the task you are undertaking do not proceed it is simple, so are you telling me you see a problem with a 2 gang switch? so you note every 2 gang switch on a PIR, move into a large scale property and your PIR will turn into war and peace. it does not need noting or labeling end of, lets not wrap our job into anymore red tape than it already is.
it is within the capability of most home owners to replace a light switch. the sensible ones will isolate the CU before attempting this. then get confused with the switch wiring if there's more than 2 wires, so we come in and it's a case of "£40 to fix it, £60 if you watch, £80 if you've had a go yourself"Hence competent persons onions: or shall we just be like america and prevent anyone swapping like for like (old for new) fronts etc....Its up to the homeowner after all whether they employ anyone to do the work for them or not........
They will deny it of course: embarrasing for them see but 80 quid seems about right.lol.........it is within the capability of most home owners to replace a light switch. the sensible ones will isolate the CU before attempting this. then get confused with the switch wiring if there's more than 2 wires, so we come in and it's a case of "£40 to fix it, £60 if you watch, £80 if you've had a go yourself"
they can get a bit epic some of these cant they...lol...note to self, never ask for advice on borrowed neutrals,:icon_bs:
hahaha!!!
they can get a bit epic some of these cant they...lol...
so wirepuller are you saying you should label it or you should follow safe isolation procedure or both?
I would just like to say that its up to the competent person (sparky and/or homeowner) as to the action to take....BS7671 and anything seconded to it are after all only guidance notes.....not sure how everyone else feels on this subject but i think it is exhausted now, so in a nutshell, some leave borrowed netrals on one mcb, some replace the strapers and remove the borrowed neutral, some label switches, some label back boxes some dont label at all, some think homeowners can change switches and some think they cant, some note it on the PIR some note it on an install cert and some dont note it all, some think the homeowner has the final decision and some believe they dont, so now that is all sorted i'm off to :banghead:
is that not a fire hazard tho............and after all, there's still gas lighting.........
is that not a fire hazard tho............
hold on i'll go to my BS library and check!!!! :devilish:Strikes me that it is a burning question
Dont you dare tel....weel be here for ever.lol...........so..................... who's going to start a thread about an outbuilding with TNC-S exported from a CU with RCD front end protecting the whole installation, where the outbuilding neutral is taken from the upstairs lighting and the line directly from the RCD via a BS88?
Reply to Borrowed neutral question. in the Australia area at ElectriciansForums.net