- Reaction score
- 43
I've got the Impact Gun and Drill Driver kit, great combination - I've gotten rid of my 18V drill and replaced the older version of the 10.8 Impact when I saw that kit come out. The Impact gun is what I use most of the time, but the drill is handy for wiring and trunking etc. Enough power to use with a holesaw on galv conduit.
I also have the GOP multicutter - dead handy for flushing in backboxes and adjusting things, I bought it to aid cutting suspended ceiling edges, but it's a bit useless for that, still not found a good solution for that! (We do Networks/CCTV/Access Control so lots of trunking and holes all over!).
The batteries don't last long in the multicutter, make sure you get the 1.3Ah versions, not the 1Ah. I'm told you can re-cell them to 1.8Ah also.
Not found any problems with temperature, if anything they're better than the NiMh batteries in my 18V set.
I also have the GOP multicutter - dead handy for flushing in backboxes and adjusting things, I bought it to aid cutting suspended ceiling edges, but it's a bit useless for that, still not found a good solution for that! (We do Networks/CCTV/Access Control so lots of trunking and holes all over!).
The batteries don't last long in the multicutter, make sure you get the 1.3Ah versions, not the 1Ah. I'm told you can re-cell them to 1.8Ah also.
Not found any problems with temperature, if anything they're better than the NiMh batteries in my 18V set.