- Reaction score
- 67,268
ihave a 6 way cream wylex lid spare.Some great replies thanks guys. Sadly the lids have long since gone and sourcing replacements is proving difficult.
Discuss Old Wylex DBs no lids. in the UK Electrical Forum area at ElectriciansForums.net
ihave a 6 way cream wylex lid spare.Some great replies thanks guys. Sadly the lids have long since gone and sourcing replacements is proving difficult.
Indeed, always worth saving them if you do a board changeihave a 6 way cream wylex lid spare.
No one will ever say that you don’t have class, Buzz!the op could make one up with a shoe box and gaffer tape ,you would need a size 12 shoes size .
All you need to do is tilt a fuse and live parts on the fuse itself are finger accessible, there is a warning on these boards to switch off before handling fuses, not good enough to comply with current requirements IMO. Many of these boards are in understairs cupboards with covers missing easily reached by curious kids. It surprises me there are not more electrocutions.Can you touch any live parts with these fuse cover missing, I used to think the same but the gap is very small around the edge it has to be IP2x and I don't think you can get your finger in to touch the live bus bar. Yes I agree you could touch the live pins when removing fuses , but that is the case with a lot of old boards that are still in service in factory's throughout the land , May be a label saying " warning turn off main switch before removing fuses" may be the answer
Reply to Old Wylex DBs no lids. in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.