PIR sensor light installation help

[Mikegh]

What is in the middle terminal of the new connector block between brown and blue, nothing? The base which that connector fits to looks like metal then again it could be moulded plastic.

Looks like plastic to me

 

[Mikegh]

There's nothing in the middle terminal

 

[loz2754]

What do the instructions say?

 

[Mikegh]

There's nothing in the middle terminal

Dang could be wrong too and there's a connection on the middle terminal to the frame

Thought it was plastic at first glance

 

[Miguel_92]

Hopefully these help

 

[Mikegh]

Nah it's plastic no connection to frame

 

[Miguel_92]

Took a screenshot of the instructions

 

[telectrix]

it's a class II fitting. does not need earthing. see terminal block bottom corner of instriuctions. brown to brown(L), blue to blue (N). park earth wire in centre terminal.

 

[loz2754]

Good. Everything you need is in the instructions, bottom right corner.

 

[Miguel_92]

it's a class II fitting. does not need earthing. see terminal block bottom corner of instriuctions. brown to brown(L), blue to blue (N). park earth wire in centre terminal.

So the earth wire is the yellow one with hints of green on the wire then. And i just stick that between blue/brown?