Discuss Quality!!!!!! in the Industrial Electricians' Talk area at ElectriciansForums.net

I recommended putting each appliance on there in circuits using commando sockets with rotary isolations, his response was "it will be cheaper to keep changing the double socket than do all that". Madness

I guess their policy on food hygiene and quality will be based on cost too!!! You didn't eat there did you?!!
 
That plugtop is filthy, there is no excuse!!
 
Tony why would I offer to install an additional socket. So they can put another 4 way socket outlet in it? By putting commando sockets in each appliance has its own individual supply, no additional items can be plugged in to overload it and it is also better for cleaning. As this is a commercial property it has a 20% eicr carried out each year.
 
Surely the problem here (apart from the dirt and using the multiway adapter) is that the plug is badly wired or with dirty pins and the resistance is overheating the pin of the plug and melting the socket.
If the appliance were taking too much current the fuse would blow in the plug and it seems unlikely (unless they were loosely plugged in) that all three outlets were faulty.
 
wouldn't put it past them to have a copper wire link in place of the 1362.
 

Reply to Quality!!!!!! in the Industrial Electricians' Talk area at ElectriciansForums.net

Similar Threads

Hello Everyone. I'm surprised this subject does not get much attention. 'The elephant in the room' I refer to is the 'new rubber'. On new...
Replies
0
Views
229
  • Article
Electrical2Go - Beginners Guide to Positive Input Ventilation (PIV) Units: A Solution to Indoor Air Quality Woes A guide to Positive Input...
Replies
0
Views
520
Hi everyone, just wanted to ask if any other sparks who use scolmore click mode have recently noticed a drop in the quality of their accessories...
Replies
25
Views
2K
Hi all, Firstly I am new to the forum, so will start by saying hi. I work as an electricians mate, and am joining the forum to gain experience...
Replies
3
Views
658
Is it acceptable to lim on eic for supply characteristics? I had a job in a hospital today and I couldnt gain access to the Switch room and the...
Replies
9
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock