Discuss Quick quote in the UK Electrical Forum area at ElectriciansForums.net

Reaction score
1
Hi guys, I’m new to self employment and I’m not sure my pricing is accurate enough. I’ve been asked to do a small job local to me and wondered if someone could give me a rough cost.

I’ve been asked to supply;
1 x stainless lantern for front of house
2 x 30w flood lights with built in PIR (for side and rear)

I’ve got the materials for around £70.00 including wiska boxes etc.

I need to do a like for like swap on a lantern by the front door.

Like for like swap on old halogen flood on side of house (high level).

Install new 30w flood at rear of house. Permanent feed taken to light, operated solely by PIR.

Also about 6-8 sockets/switches need pinning back in the kitchen. I think the kitchen was retiled meaning existing socket pins aren’t long enough.


There will be two of us on the job so not expecting it to take much longer than 1.5 hours to be honest.

Any quotes would be much appreciated.

Cheers.
 
minimum charge is half a day for 2 of you, whatever your hourly/day rate is. you need
to go to wholesaler. go to job, get back home. all chargeable time.
 
was going to sayaround £250 +materials.
 
One day labour charge £500 (no such thing as half a day in my book) but this kind of job you should be down the pub by lunch time easy if on your own. If its 2 of you then £250 each.

Materials what ever they are from the wholesalers , some people add 10-35% , I personally don't add a mark up as my rate covers me for my time driving to collect gear

Occupied rewires I quote £600 per day
 

Reply to Quick quote in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Been covered before, but wondering if any amendments recently. I’ve been asked to fit detectors in a bungalow holiday cottage. Just over the...
Replies
0
Views
640
Been asked to move, remove and add some sockets the kitchen and I’ll need to add a circuit for an electric hob. Looked at the board and it’s one...
Replies
17
Views
682
I was asked to see why a set of sockets weren’t working in the house (which appear to be a ring circuit based on breakers) There was no power on...
Replies
27
Views
1K
I’ve been asked to price up a job which includes fitting a 100watt led flood on top of a 6m pole. Thinking of using a lamp post with a...
Replies
1
Views
2K
Looking for some cabling advice for my garden project. I’ve put together this diagram below, which hopefully explains what I’m trying to achieve...
Replies
5
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock