Discuss Strange RCD Fault in the UK Electrical Forum area at ElectriciansForums.net

You have said you haven't carried out continuity tests, you are going to do them on Monday.

does the customer know they have got a chancer trying to find this fault? Because you are just extracting the urine from them.


Not reading posts....

Continuity done at first test but nothing...For your information,Im not charging by the hour for this job.
 
I am reading posts, you have said in what I quoted earlier you are going to check end yo end continuity on Monday.

charging for the job or not this is getting silly now, Benny Hill springs to mind with this job.
 
I am reading posts, you have said in what I quoted earlier you are going to check end yo end continuity on Monday.

charging for the job or not this is getting silly now, Benny Hill springs to mind with this job.

Im going to DOUBLE check as there are know issues with mixed legs. Earlier posts stated I had already checked.

1k?
 
1k?

you must be loaded if you can afford that and not be charging the customer?

show me the money and I will be there once I have my van back on the road.

Thats the point pal, Im pretty confident that 1k will stay firmly in my pocket....and yes I am loaded :p

I am also a man of my word, I will pay that primarily as I don't have the time for it now and secondly because I know the CAUSE of this fault won't be found in a day.

Anyway, I have 8 quotes to do today, 2 vans and a car to wash, a nasty cold AND a hangover,this thread is distracting me. If anyone has anything constructive then please post :)
 
constructive....... sort out the mixed up legs for starters. this may well lead to solving the tripping problem.
 
Tell you what JRC, I'll go up for a grand and bottom this out for you. I want half the cash up front though

Excellent, 1k is on the table pal....

I can't believe how people are confident in finding this without even seeing the installation! Either very naive or incredibly fast while incredibly superhuman.

Ill stand by this, I could really be doing without this hassle Ive inherited as I have a ton of work kicking off. If any spark wants to solve this ( in one day ) and can provide an invoice. Ill pay 1k...

Takers ?

GO TREV GO TREV GO TREV wish I had some pom pom's to wave arround
 
Thats the point pal, Im pretty confident that 1k will stay firmly in my pocket....and yes I am loaded :p

I am also a man of my word, I will pay that primarily as I don't have the time for it now and secondly because I know the CAUSE of this fault won't be found in a day.

Anyway, I have 8 quotes to do today, 2 vans and a car to wash, a nasty cold AND a hangover,this thread is distracting me. If anyone has anything constructive then please post :)

Is that all??

That's just half a day's work to a Geordie.

You're just a lightweight lad!!

Trev could crack that off before his Elevenses tea break.

(don't forget to add the cost of TESTING to your 8 quotes.)
 
Last edited by a moderator:
Excellent, 1k is on the table pal....

I can't believe how people are confident in finding this without even seeing the installation! Either very naive or incredibly fast while incredibly superhuman.

Ill stand by this, I could really be doing without this hassle Ive inherited as I have a ton of work kicking off. If any spark wants to solve this ( in one day ) and can provide an invoice. Ill pay 1k...

Takers ?

The confidence comes from experience which in turn comes from maturity which in turn comes from age, so maybe when you grow out of being a cocky little twonk you'll be half as good as some of these lads. :)

(helpful enough for you??)
 

Reply to Strange RCD Fault in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Called out to fault on RCD tripping maybe twice in a month for sometime. Did all the tests & found RCD was faulty, Refitted a new Rcd Type A which...
Replies
2
Views
843
My friend just moved into a new build flat and its for a disabled person with a hydraulic lift to go to the upper floor. There was/is a leak...
Replies
8
Views
459
Hi all, Been a while since I have been on here. I have been on an apprenticeship the last 3 years training in the BMS world. Taking that into...
Replies
7
Views
357
Hey all, I'm looking for some advice to help me troubleshoot my strange issue with my consumer unit/fuse board on which my RCD keeps tripping...
Replies
25
Views
2K
Hi all, Gone to look at a intermittent ground floor sockets fault today, the RCBO was tripping at random times with no pattern. Nailed down a...
Replies
11
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock