-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss switch using water in the UK Electrical Forum area at ElectriciansForums.net
Reply to switch using water in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
So was on a call out today and cooker circuit kept tripping the RCD. Disconnected at the board and at the cooker switch and IR’d the cable and...
Good Afternoon All,
I moved into a flat around 2 months ago.
A few times only (maybe four times in the two months) I've turned on the kitchen...
Hi All,
I own a country Villa out in the Spain countryside. Was having problems with water pressure so local tradesmen advised to get a water...
hello all.
I am trying to add led strip lights to my boat trailer. I have marine grade submersible lights. I will have them running parallel to...
can anyone please advise on where the wires go?
My electrician installed a new cable ready for when I bought a security light. The cable as shown...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Fitting bolt in fittingJust about bearable on a perfectly flat wall, but uneven surface or mortar line they're a royal...- Latest: nicebutdim
-
Veritas R8 6 beeps unsetAs a guess I would be looking at the tamper switch in the bell box.They can rust and cause all...- Latest: Bob Geldoff1234
-
BatteriesThe batteries on my Spear and Jackson blower, vacuum, mulcher need replacing. Battery No...
- Latest: ketchcat
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.