Terminating SWA with Wylex REC Supply Isolators

[Michaelwgroves]

UKPower Networks wanted 150mm * 150mm

 

[High Tower]

You may struggle with 6" trunking possibly a bit tight with that many tails and make sure that there's enough room to turn the SWA into the 110M's!!

 

[RBreeze]

if it was me, i would use an individual box for each and use the piranha nuts for each gland to give yourself the best chance of keeping you Zs down

 

[Michaelwgroves]

From the top rows of 110's I'll be coming stright out the top, also for the bottom rows out the bottom, so should be okay with SWA.

 

[Michaelwgroves]

if it was me, i would use an individual box for each and use the piranha nuts for each gland to give yourself the best chance of keeping you Zs down

Thanks for the suggestion, would you mind elaborating a bit more, I'm not sure if I am following you?

 

[Octopus]

From the top rows of 110's I'll be coming stright out the top, also for the bottom rows out the bottom, so should be okay with SWA.

Surely you mean your sparky will be!!!!!

 

[Michaelwgroves]

if it was me, i would use an individual box for each and use the piranha nuts for each gland to give yourself the best chance of keeping you Zs down

Thanks for advice on piranha nuts, sounds like a good idea, but I don't understand the comment on individual boxes, can you elaberate?

Thanks

 

[Michaelwgroves]

Slight revision, Cut-Out is slightly bigger, I've also set meters directly on trunking to reduce overall height and lift lower switchfuses.

UKPower Networks and EDF have both approved design, but I would be greatful of any further suggestions.

Thanks

 

[High Tower]

Looks good and well thought out, however supporting and terminating the SWA's into the 110M's is going to be tight

Also have you confirmed that a 10m clearance on the bottom of the Ryefield is ok with the DNO

 

[electric will]

Who's doing the work?