doesn't

Recent contents Top users
  1. P

    Strange activation with pir

    HiHave fitted a stienel pir on the back of a brick pillar to control some lights on drive way. Tested during daytime by walking by and driving van by all ok. Customer rang to say doesn't work when he drives by (warm car ) but works if you walk by. I went down last night and can confirm what he...
  2. yellowvanman

    RCD tripping

    Email from customer: Our Solar PV installation is protected by a 30mA RCD in it's own CU which regularly trips during the morning inverter startup at this time of year (when the roof is persistently very wet). We have a transformerless grid-connected Power One Aurora inverter, and I...
  3. HappyHippyDad

    Class 2 floodlight preferably with PIR but doesn't matter??

    Is there such a thing? This looks promising Forum Lighting Juno 2 Light Black Outdoor Spotlight Complete with a PIR Sensor - Forum Lighting from Castlegate Lights UK but wasn't really looking for a twin! As usual have looked and looked but to no avail... somebody will probably say 'well you...
  4. C

    Baumatic oven BO625-ss doesn't start even after setting the clock

    Hello My friend has got a Baumatic oven, which I broke couple days ago. I wanted to change the time on clock, but the buttons didn't react at all, so I've unplugged the oven from power source. After switching on, buttons still hasn't been working as well as anything else (oven doesn't start, if...
    • Char
    • Thread
    • after baumatic clock doesn't oven setting start
    • Replies: 1
    • Forum: UK Electrical Forum
  5. dlt27

    EICR thoroughness.

    I have been doing An EICR report today with another electrician from my workplace. He has tested double the amount of circuits I have. Now I follow testing to the book however he basically said that he: 1 calculates R1+R2 and just measures zs as he says as long as it is ok what does it matter...
  6. M

    110v earth loop impedance

    My test meter only works on 230v.... So... Is there a way of working out the Earth fault loop impedance on a 110v supply that is supplied by a hardwired 110v Centre tapped to earth transformer? Anyone else come across this. I have some additional 110v sockets to fit in a workshop but need to...
    • matdom
    • Thread
    • 110v doesn't earth impedance loop loop impedance meter
    • Replies: 10
    • Forum: UK Electrical Forum
  7. robd

    EICR SWA not buried.

    Hi All, Just writing up an EICR I did today, got a long garden with SWA feeding shed at bottom, armoured not earthed (code 2) but I also noticed for part of it's run, near the veg patch, the SWA is lying across the ground. It doesn't meet 522.8.10 so I'm guessing code 2 and a recommendation...
  8. A

    selling pv sol software

    hi there is anyone selling copy of pv sol or pv syst software. if so can you please let me know thanks
  9. P

    Cable Capping is NOT required and DOESN'T protect

    Hi Guys :yawn: This is my understanding about the use of capping, 1. Cable Capping is not designed to protect against nails, but to protect the cable from the plasterer's trowel on traditional plastered walls and particularly aggressive lime based plasters. Neither the steel version nor the...
    • Piratepete
    • Thread
    • cable capping doesn't protect required
    • Replies: 20
    • Forum: UK Electrical Forum
  10. S

    When testing for volts why doesn't earth become live?

    Hi, I am thinking of doing the 2365 course but in the mean time I am learning a bit myself and I have a question which I hope someone can help me with please: When I test between line and earth to see if something is live (230V), do I make the earth live? I kind of know you don't as I left my...
    • sensible
    • Thread
    • become doesn't earth live testing volts
    • Replies: 3
    • Forum: DIY Electrical Advice
  11. D

    Replacing shower

    Was wondering how many sparks when asked to replace/install new shower do the complete job(plumbing work as well as electrical). I've quite happily installed the lot in my own house but I can't imagine my PL insurance covers me if i caused a leak in a customers property. Obviously the...
  12. Q

    Off peak immersion heating wiring query...

    I've been testing some flats that have immersion heaters, 2 supplies - daytime and off peak. The off peak supply is wired from the meter through a contactor then back into the mcb, with the outgoing supply to the immersion heater coming from the contactor. However, when the mcb is isolated, the...
  13. P

    Test switch for emergency light,

    Hi Guys, Been to do a pir today in an hmo house and all the emergency lights had test switches exept one,is it a problem?
    • philipb
    • Thread
    • anyone doesn't emergency light lights means switch test
    • Replies: 4
    • Forum: UK Electrical Forum
  14. J

    3 phase colours

    When you are using 3 phase colours for live neutral and earth, should you use black or grey as neutral, I usually use black as it was the old neutral colour. I work self employed for various different companies and some say you should NEVER use black as neutral, others say only use black. I...
    • jmc1683
    • Thread
    • 3 phase black colour colours doesn't earth neutral phase
    • Replies: 39
    • Forum: UK Electrical Forum
  15. P

    Doesn't make sense!!

    Hello everyone this is my first time on this forum and I'm looking a bit help!! I'm starting to think I'm a complete idiot!! (Maybe I am??) A simple apartment block intercom system, has a 12V AC supply. Is it possible, for a DC door strike to operate properly?? I can't see how it could, but...
  16. N

    Why doesn't my multifunction tester have a time delay option?

    At least for the low ohms measurement range anyway. It'd be great to be able to quickly set a delay period between the pressing of the Test button then the actual performance of the test, for those awkward tests where you can't hold the probes in place and press the Test button at the same time...
  17. B

    changed a light and now it doesn't work????

    Had an email from my wife, one of her friends husbands changed a light over and now it doesn't work. Dunno what people think sometimes, I can almost guarantee he mixed a neutral with sw/wire! I wonder if people think, how hard can it be, electricians can do it?? lol Anybody else get this?
    • bk81
    • Thread
    • changed doesn't earth electrical work light neutral where won't
    • Replies: 31
    • Forum: UK Electrical Forum
  18. S

    Wattson Solar Plus

    One of our customers has asked about monitoring his PV system for both generation and home usage. He doesn't have internet and doesn't want to spend a lot, so I have been looking at the Wattson solar plus. Does anyone have any experience of this and how well does it work? Can you recommend...
  19. VoltzElectrical

    why the light doesn't work!

    I was fault finding a streetlighting column today and found this. That'll be why the light doesn't work then. Wouldn't it have been better to drop a new length of cable in instead of using chokky blocks? They have their place sure, just not inside the very top of an exposed lighting column.
  20. P

    alarm detector doesn't get 12 voltage from panel, why?

    Hi there, I have a honeywell optima compact panel and wanted to do the walk test, but doesn't work. Tested detectors given them direct 12 voltage, they are ok. They don't get 12 voltage from the panel, checked wireing, it is wired as shown, it should be correct. Checked output on panel and it...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
UK Tiling Forum
Electrical Advice | Electricians Blog
Electricians Talk
UK Tiling News
Contractor Advice Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock