C
Chris Hicks
I need to connect a 3 phase inverter for a 10kW PV system through its own 3 phase breaker to the incoming supply.
There are no spare fuseways in the avaialbe DB so I need to put in an additional DB.
I would ideally like a single way (for a 3 phase breaker - i.e. 3 lines) 3 phase DB with mains switch/isolator.
The smallest I was offered by local suppliers was a 4 way (12 lines in all).
Having taken delivery of the unit, it is physically too bit (i.e. the same size cabinet as a DN with more fuseways, but with fewer apertures for the breakers).
I can't actually fit it in the avaialble wall/room space.
Can anyone offer any suggestions for a smaller cabinet, or ideally, single way 3 phase DB.
Hope that makes sense
Thanks
C>P>H
There are no spare fuseways in the avaialbe DB so I need to put in an additional DB.
I would ideally like a single way (for a 3 phase breaker - i.e. 3 lines) 3 phase DB with mains switch/isolator.
The smallest I was offered by local suppliers was a 4 way (12 lines in all).
Having taken delivery of the unit, it is physically too bit (i.e. the same size cabinet as a DN with more fuseways, but with fewer apertures for the breakers).
I can't actually fit it in the avaialble wall/room space.
Can anyone offer any suggestions for a smaller cabinet, or ideally, single way 3 phase DB.
Hope that makes sense
Thanks
C>P>H
