EICR on marina helpppppp

[Bradley6969]

Are you carrying out an EICR or are you looking at a Report done by someone else.

Sorry but I'm still struggling to understand the question. There will be a Ze at the intake, and a Zdb at each sub board. The maximum permitted Zs at each DB will depend on the OCPD protecting the distribution circuit.

Yes I’ve got Zdb and ka, but I’m on about max Zs left hand side of RCD X1

 

[ipf]

What is circuit 1TP?.....whatever it is, you want the measured Zs for it.
Not much more testing carried out...IR, for starters.

 

[Bradley6969]

What is circuit 1TP?.....whatever it is, you want the measured Zs for it.
Not much more testing carried out...IR, for starters.

It’s last years test report hence why I’m trying to find out why there is a Zs reading with no final circuits? And it’s 1 triple pole switch I presume

 

[ipf]

It’s last years test report hence why I’m trying to find out why there is a Zs reading with no final circuits? And it’s 1 triple pole switch I presume

Read the circuit details.....the other sheet.

 

[Bradley6969]

Read the circuit details.....the other sheet.

Says shore isolator

 

[ipf]

That's the final circuit, accordingly.
Better find it before that tide comes in.

 

[westward10]

Are you doing a retest of this site.

 

[ipf]

It can't be far away, judging from the Zdb and Zs.
and if it's 3 phase, it's badly put together.
edit. Gone....you can but try.

 

[Bradley6969]

Yes retest of site, and that Zs is for final circuit as this DB only has a main switch that feeds another DB

 

[Deleted member 9648]

It's not a final circuit then, it's a distribution circuit, and the schedule is specific for the distribution circuit. The final circuits will be connected to whatever DB it feeds, and there will be another schedule for those.

 

[Bradley6969]

It's not a final circuit then, it's a distribution circuit.

So just put NA just confused as who ever did it last put a reading down

 

[Deleted member 9648]

No mate, take a Zs reading at the DB the distribution circuit feeds, that will be the Max measured Zs for the circuit.

 

[SparkyChick]

The Zs for the distribution circuit will be the same as Zdb at the board it is feeding.

 

[Deleted member 9648]

I'm a tad concerned as to your competence to be carrying out an EICR in a special location, no offence but this requires an experienced electrician.

 

[Bradley6969]

It's not a final circuit then, it's a distribution circuit, and the schedule is specific for the distribution circuit. The final circuits will be connected to whatever DB it feeds, and there will be another schedule for those.

It's

If you’ve been reading I’ve put I’m an apprentice and I’m working with people just like to ask on here instead of looking stupid at work but thanks for your help

 

[Bradley6969]

The Zs for the distribution circuit will be the same as Zdb at the board it is feeding.

Sorry to get this right, DB1 feeds DB2 taken readings at DB2 Zs reading at DB2 will be recorded on DB1 as Zs for distribution circuit and DB2 Zdb will be same reading

 

[SparkyChick]

Sorry to get this right, DB1 feeds DB2 taken readings at DB2 Zs reading at DB2 will be recorded on DB1 as Zs for distribution circuit and DB2 Zdb will be same reading

Yes, as @wirepuller posted just before me

 

[westward10]

As a matter of interest where is this marina.

 

[Bradley6969]

As a matter of interest where is this marina.

On the water hahahaha

 

[Bradley6969]

Down southhhh