Meters and boards Question

[Luke105]

I work for a company who installs electric heaters.

Usually we remove old storage heaters and replace them with our heaters using the same point with a new switched fcu.

The fuse board is usually just an old Wylex type with just an on off switch and non switched fuses.
The board is powered from the live coming out of the radio teleswitch meter so to make the board live 24 hours we remove this cable and put it into a Henley block which has permanent live feed.

The questions are....
Are we allowed to touch these meters as there are stickers all over them saying property of the electricity board.

Secondly, using the old points coming from the old style board with just an on off switch. Is this ok?

 

[The Ghost]

No. And if they are on economy 7 they are sure gonna get a shock when they get the bill.

 

[Luke105]

No. And if they are on economy 7 they are sure gonna get a shock when they get the bill.

Can you give more detail.

Yes I know about the economy tariff. Just curious if any laws or regs are being broken

 

[Deleted member 26818]

Some electricity supply companies don’t use separate meters for economy 7.
They just charge a different rate for all electricity used during the off peak times.
However, it sounds like these new heaters are not storage, and are designed to be used at any time.

 

[ipf]

No. And if they are on economy 7 they are sure gonna get a shock when they get the bill.

Sounds like fed from henleys not E7...….does sound crap, though.
Still reusing rewireables???

 

[The Ghost]

Yeh you are messing with DNO equipment and you can be prosecuted in theory at least. Although I think we all know it is very rare if ever. And @ipf I guess they will be fed from Henley blocks, I did mean when they bypass the E7 and go on to what is an E7 tariff daytime rate they are gonna faint when they get the bill.

 

[Luke105]

Yes all the electricity in the house is cheaper over night because of the tariff.
Forget the tariff and the prices of electric etc.
I’m more curious as to should we interfere with these meters belonging to the electricity board and is the fuse board ok considering it is old with only an on off switch.

 

[ipf]

This is sounding more and more dicey...…….

 

[GeorgeCooke]

Looks like you work for a load of cowboys. Do your customers know that you are taking them off E7? Do they know that standard electricity is 3 times the cost of gas.
Only cowboys touch electricity board, actually DNO, equipment.

 

[Luke105]

Lads, forget the e7 tariff. Customers are made aware that they have no need for it. It isn’t the tariff I need to know about.
It’s the old board and the dno equipment I’m curious about