Discuss Old DNO supply in the UK Electrical Forum area at ElectriciansForums.net

Are you a competent bat person? If not you you have to notify the LA prior to disturbing any bats in the loft. It will cost you £500.00 to cover the cost of the post inspection bat interviews.
 
looks like that earth cable is just earthing the pipe.those v.i.r. cables dont like being moved after 60 years

Hey,

The home owner is away at the moment so I haven't been able to get back in there yet to investigate (unless they have got another quote?)
Your right about them VIR's though, horrible stuff, I used to do a lot of live jointing on the DNO side and used to come across it feeding street light's.
 
Vulcanised Rubber Insulation not Vulcanised Insulated Rubber. Tis the rubber which is Vulcanised as insulation.
 
I've always known it as VIR.
I replaced miles of it in the late 60's with PVC singles.

If you google VIR / VRI it comes up about 50 /50.
With a few people insisting it's VRI.

I suspect VRI was the original (sounds a better description) and probably Trademarked or Copyrighted by the first manufacturer.
Then all following manufacturers had to use VIR as the description.

However VIR / VRI refers to singles.
TRS is probably the correct title for VRI /VRI singles within a Rubber sheath.
 
I've always known it as VIR.
I replaced miles of it in the late 60's with PVC singles.


If you google VIR / VRI it comes up about 50 /50.
With a few people insisting it's VRI.

I suspect VRI was the original (sounds a better description) and probably Trademarked or Copyrighted by the first manufacturer.
Then all following manufacturers had to use VIR as the description.

However VIR / VRI refers to singles.
TRS is probably the correct title for VRI /VRI singles within a Rubber sheath.
Me too in the 70's
 

Reply to Old DNO supply in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

On an EICR I found a 200 amp 3ph supply, TNS earthing (which looks original) and Ze of 19 ohms. No rods. No RCDs. L1 -> N was about 0.5 ohms...
Replies
11
Views
1K
I've got a job in a tucked away property that has an old Lucy Oxford service head. It's been a while since I've come across one. Am I remembering...
Replies
4
Views
1K
Afternoon All, Just pricing up a job and thought I'd pick your brains. Quick run-down, Block of Flats with an underground car park. In the...
Replies
27
Views
2K
Incoming supply on our job comes into the building and then the tails from which go into a switched isolator with 200A fuses fitted. No idea...
Replies
5
Views
961
DNO ripped out antique main incomer/breaker .The guy hated us and himself and everyone else by the end of the job ! . Client going to contact...
Replies
21
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock