Discuss rcd protecting tails again in the UK Electrical Forum area at ElectriciansForums.net
then you'll have 2 30mA RCDs in series. not only will you have no discrimination, but you'll have no division of circuits in the case of a fault tasking out the entire installation.
Tel that was n.i.c 's answer as well.
Just a FYI, those sunnyboy inverters have a black plastic pull out at the base that's actually a dual pole cut out, and classes as a DC isolator, so that aspect of the install wasn't actually a problem.No DC isolator.
Tell the good old nic ...... They're full of shyte anyway so you may aswell fling some of it back there end
Just a FYI, those sunnyboy inverters have a black plastic pull out at the base that's actually a dual pole cut out, and classes as a DC isolator, so that aspect of the install wasn't actually a problem.
probably more by luck than judgement though.
Just to confirm Glen I know capping isn't classed as mechanical protection I mean even when people normally rough it in they at least normally chuck some capping on them.
Only to stop the spreads trowel.
Lol.... Clever stuff that capping!
always amuses me when the decorator insists he thinks I should be using capping so that people can tell where cables are with one of them thingies.... Until I bring in a bit of plastic capping.
Reply to rcd protecting tails again in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.