sma 5000tl

[erf151an001]

Hi Guys

I'm installing 2 x 5000 tl,s on single phase, DNO application approved and local transformer upgrade done. Not installed any 5000,s before but they come with the same set of instructions as the 4000's.

The thing is being as this is over 3.6 kw per inverter I assume I need to set it to G59. But I can only see the settings for G83 in the book. I always usually set the dials to 5 - 8 for G83.

Anyone help for G59 settings

Regards

Erf

 

[JohnBoyZ]

What are the factory settings, as detailed on the lose sheet supplied with the inverter, if they G59 then you can leave the switches at 0/0 or maybe 0/1 to set English language if it doesn't default to that.

 

[erf151an001]

Okay I'll check that tomorrow.

Thanks for that