R
Robert Casey
Hi, I was wondering if I could get a little advice off you guys. I'm installing an three phase 8kw sauna over roughly a 50m run. The board is a typical 20-30yr old three phase commercial board with no rcd protection. I'm thinking 5 core 2.5 swa for the cable up to the sauna then into some kind of box or isolator and then down in 5 core 2.5 flex and into the unit. What I need help with is I guess as there is water involved it will need some sort of rcd protection. I'm wondering if someone could advise me on what isolators and or rcds I will need. I don't work with three phase too often so any any advice would be appreciated as I have to do this correctly for obvious reasons. Thanks!