Hi again, as I moving kitchen to other room and as stated above should be seperate circuit for oven, hob, and ring socket I dont have space to connect it directly to exist consumer unit:
I have COOKER what its fine
I have sockets kitchen its fine
Needed space for HOB and SHED (I want add shed also)
One electrician said is not a problem and he can add "smoke detector & bell" to "LIGHTS DOWNSTAIRS" - to make a space for a HOB
He can also connect new "SHED" to "WATER HEATER" (water heater is not used anymore i have connected there 1 light in utility room where before was water heater)
Other electrician say is not good and he dont put 2 things in 1 circuit...
It will be fine if he connect circuits together or it is possible to run new cable from main switch directly to the consumer unit shed?
Cable can go directly to the shed or should be firstly connected to the MAIN consumer unit??
I asked last electrician about this he said it should be fine but he need to double check on some paperwork...
I mean put the cable from this switch, it is of course after electric meter...
Of course shed consumer unit will be double pole protected: