I've just done an insulation resistance test between line and earth and got 0.0 Mohms for most circuits. Obviously this is an F1, but what I don't understand is why the CB doesn't trip. Is the answer that the resolution on my tester isn't high enough? So I could for example have 0.049Mohms and...
Hello. Today first time something tripped breaker in my house. I mean i was sitting on Windows 10 desktop ,like always and i hear BUM from fuse box. And power go down. Pc turned off.
I have that pc almost 1 year and something like that never happened. I think there was not circuit...
Guys so my parents built me my own room in the backyard that is seperate from the main house (we have almost an acre of land) when we moved into our new house this past year but the person who built it micky moused the wiring and just made an extension cable that connects from my room to an...
Hello!
Our dryer stopped working after a power outage. I checked to outlet with a multimeter and it has no power to it. I checked the breaker and the power lines going into it have no power so it has no power. I replaced the breaker and there is still no power. Any idea what the problem could...
Seems to be my month for finding odd bodges by supposed professionals.
Installing an external socket in a shed today at a park home (non-mobile home) and find this label on the consumer unit:
and this behind the door:
It looks like the CU was installed at the factory and then shipped with...
Hey everyone!
New to these forums. Looking to get advice on the best option to resolve this:
I have a 50A 6 gauge wire (with an un-used neutral) coming to my detached garage from my main panel that powers an electric car charger via a 6-50R. The car charger only takes 20A but due to the 6-50...
Hello, DIY electrical question here. I have a 100amp breaker panel in my pole barn. I am trying to wire in a system which requires a max 80amp input with max 60amp output with a minimum 4AWG. My question is what gauge wire do I need to run from my panel? And what size breaker do I need? Would I...
I have been living in this house for five years. From time to time, the sub main breaker (bottom-right in pic1, the RCCB breaker that is tripped in the photo) for the ground floor would be tripped. This happens during the raining season (June to October). In the dry season, there is no problem...
Hi. Recently, one of my AFC I breakers began tripping any time even a small load was put on it. To make a long story short, I have replaced all the receptacles and switches on the circuit and have replaced the AFCI circuit breaker. Really the only 2 things left I haven't touched are two...
I have a very small circuit in my house. Probably 8 outlets 6 lights. The breaker for this circuit has a direct short somewhere. It didn't start this way. At first it would stay energized for a couple of minutes then trip. The more I reset it the shorter it would last. Now it trips immediately...
I have a contact breaker that trips off randomly. Sometimes it's two or three times a week and at other times it can go six weeks or more without tripping. It doesn't seem to be associated with switching any lights or appliances on or off and I'm worried it could trip off when we're away on...
Hi, I live in a house that has been converted into three flats. Each flat has a circuit breaker box, but there doesn't appear to be one for the communal lights. We have an issue with the communal lights being permanently on (because of a faulty timer switch). Is it normal for there to be no...
So after turning on a shop vac, the lights and outlets in the room went out. No breaker or gfci have been tripped. I also am not 100% sure what breaker this string of outlets is even on. I cant trace it without making holes in the walls. Asnyone have any ideas or had a similar problem?
I know it needs to be replaced, but what actually causes a 3 pole breaker to suddenly stop being able to stay in the on position please, and that's even without it connected to anything (i.e. the switch mechanism makes the correct sounding click when push up, but immediately springs down)????
New member, DIY homeowner here.
I bought a new in-ground 1HP 120v Harris pool pump (online) and had it installed by my pool maintenance company. A few weeks later it appears blown -- it hums when the power goes on -- but I removed the back and the shaft turns easily so I suspect wiring issues...
Hi chaps and chapettes,
I have a buried 6mm SWA 32a radial circuit powering a single 32a commando/ceeform, i'm looking to add a 16a ceeform for convenience. Can I use a thermal-magnetic breaker to derate to 16a. There isn't space for a 2 way CU so would this be my best option?
Thanks.
Hello! I’m confused as to how to add up total amperage on my panel when it comes to double pole and single pole. So I can avoid overload. I want to add a 50 amp breaker. Any advice?
Hi guys, I have a dedicated circuit for my fridge which is on a 32amp circuit and also runs off a fcu. Is it possible to have the fridge and a separate freezer connected to the double gang socket ? So both appliances are sharing the socket . Thanks !
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.