enclosure

Recent contents Top users
  1. Richard Burns

    Lighting switched line in another light's enclosure

    I had a job to replace downlights with fluorescent battens, however when I came to the job they wanted the downlights to stay as well, this meant a large increase in the job requirement supplying new wiring for the fluorescents. I wired this is such a way that the switched line for the...
    • Richard Burns
    • Thread
    • another aus downlight downlights enclosure fluorescent lighting supply switch switched
    • Replies: 1
    • Forum: Australia
  2. E

    adding new socket

    can someone tell me if it's still obligatory to install an rcd when adding a socket outlet if there's not one already. I know the 17th says yes but at a seminar i attended in Dec '10 it was said to be imminent that that rule was being changed. for me, it makes no sense when adding a socket on a...
  3. K

    PV Install and Existing RCD's

    OK, this may be an obvious question, but can a PV Installation be fed from the existing CU, if the CU contains an RCD, or would you be required to split the tails, and put the PV on its own MCB within it's own enclosure? Was told today by an NIC inspector that they require their own enclosure...
  4. D

    Choc Block in a plastic enclosure on a lighting circuit... Is it compliant?

    Fitting new downlighters (2 independent lamps) and was planning on adding them to the end of the lighting circuit in my loft using a suitably rated terminal strip, inside a surface mounted plastic enclosure. Read somewhere that this wasn't compliant, can someone enlighten me? Have I got the...
    • DNS1
    • Thread
    • block circuit compliant enclosure lighting lighting circuit plastic products somewhere wagos
    • Replies: 3
    • Forum: Industrial Electricians' Talk
  5. M

    3 Phase feed with 2 cables

    As above really, Massive green house converted into small units. Basic supply was single phase and when he asked for 3 phase this is what they ve done. Basicly you ve got 2 phase and netural from one cable and a seperate earth, 2nd cable has 1 phase another CPC. Its a private supply, All this is...
    • mattmoo1974
    • Thread
    • 3 phase aus cable cables enclosure holes phase
    • Replies: 5
    • Forum: Australia
  6. D

    Pir coding

    any body got a reg to say SWA is not correctly terminated..! got a funny feeling there is no direct REG but im trawling through Selection and Errection chapter with no avail for a reg that i can utilise as a general purpose one!! if all else fails i will put down not terminated correctly IAW...
    • DurhamSparky
    • Thread
    • aus coding enclosure gland other pir terminated
    • Replies: 10
    • Forum: Australia
  7. B

    Terminating swa into plastic enclosure

    I recently picked up a job of fitting a supply to a garage. At the supply end I put it on it's own board to separate it from the house. In the garage the customer bought the board and it's a plastic wylex garage unit, but the enclosure cover and sides come off. How can I terminate an armoured...
    • Bright.Spark
    • Thread
    • aus enclosure plastic swa
    • Replies: 14
    • Forum: Australia
  8. C

    plastic enclosure

    hi all just wired a lighting circuit and had 6 cables (feed,wall light x2,wall light switch,centre light, centre light switch ) to connect in a enclosure, i just used a plastic double backbox, and blank plate for the enclosure which was a bit time consuming, can anyone recommend some decent...
  9. J

    metal board on tt system

    Hi all, where does it say in the regs that you can't use metal consumer units on a tt arrangement? been told this by a couple of people but can't find anything cheers
  10. Spoon

    Mains enclosure on hand rail

    Hi all. Please can you advise me if there are any regulations about bolting a mains powered enclosure onto hand railings? The supply to the enclosure is single phase 10A
  11. C

    craig and derricott 400v 63A switch disconnector

    as new to sell this is a Craig and Derricott lockable IP65 enclosure with built in 63A 400V switch disconnector AC23 dimensions of the enclosure: D 125mm (excluding switch), H 270mm, W 285mm. top and bottom gland plate dimensions: 220mm x 90mm the front switch arm is lockable into position as...
  12. C

    Crimps in an enclosure?

    Do crimped connections have to be in an enclosure (e.g. a choc box), or can they just sit free? Thinking about for normal downlights......
    • Crosswire
    • Thread
    • aus crimps enclosure
    • Replies: 14
    • Forum: Australia
  13. T

    Protection against electric shock to off grid enclosure

    Hi, New to site so forgive any clumsiness. I have a problem and I wonder if anyone can help. Basically I am bringing in AC Voltage from a wind turbine into a steel container. The container houses the inverter, batteries and a 230v AC Installation - lights and sockets as well as an external...
    • tomwaits
    • Thread
    • against aus electric electrical enclosure grid off off grid protection shock
    • Replies: 2
    • Forum: Australia
  14. M

    through crimped cable enclosure

    any one know of such a thing to grip and protect from movement. just a thought as this issue was mentioned the other day.
    • martysparky
    • Thread
    • aus cable enclosure through
    • Replies: 2
    • Forum: Australia
  15. D

    Outdoor socket.. Help please?

    As title says. Me and my dad have been thinking of doing this for a while so thought id ask for some suggestions on here. We want to put a single outdoor socket on the side of our house for a small charger which stays outside. In the house there is a double socket just over 2 feet to...
    • DPrice
    • Thread
    • aus enclosure help help please outdoor outdoor socket outside please protection socket
    • Replies: 39
    • Forum: Australia
  16. G

    suitable voltage operated trip replacement

    Had to install an 80A 30ma RCD today to replace a Voltage operated trip. Customer wasn't interested in a new consumer unit. Had a fair bit of difficulty terminating the 25mm tails using the unsuitable enclosure I bought to house the RCD. Any advice on the best one to use for when an RCD is...
    • GPack
    • Thread
    • aus enclosure operated replacement suitable switch tails terminals trip voltage volts wylex
    • Replies: 5
    • Forum: Australia
  17. W

    CU in a Flat in an Enclosure

    Hello Chaps, From a previous post a few week ago I have some pictures at last. This is the CU in a ground floor flat (1984), the customer wants new bathroom lights, sockets in Kitchen, new shower. The problem is replacing this old Crabtree board is not easy, there is no room in the metal...
    • walec
    • Thread
    • aus enclosure flat
    • Replies: 4
    • Forum: Australia
  18. B

    Rcbo

    What stand alone enclosure do I need for a wylex rcbo?
    • bathroomboy
    • Thread
    • aus enclosure rcbo
    • Replies: 2
    • Forum: Australia
  19. S

    Testing SWA

    Does anybody know what table in the regs gives the size of armouring in mm when using the SWA as a CPC ? so i can write this in the circuit details on the installation cert.
  20. M

    Inverters/control panels

    I heard somewhere that all inverters inside control panels now have to be enclosed in their own enclosure..is this true? In the case of this panel I rewired (using original panel/backplate) how should I have done it? does each inverter need to be fully enclosed? or would partitioning do...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Contractor Forum
DIY Talk
UK Tiling Forums
Plumbers' Talk
BS 5389 Tiling Standards
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock