faulty

  1. W

    Faulty Tridonic HF Ballasts?

    Hey, I've been a member for a few years and used this forum occasionally to answer or confirm electrical questions i've had in the past, but this is my first time posting my own thread. We recently had a job for a customer to install two 2x58W Cat2 HF Modular Surface fittings (Ansell I think)...
  2. P

    Faulty gas meter?

    Hello, I've been reading only on here on and off for a couple of years and thought I'd finally get around to a post!! I'm an Elecsa member now for a couple of years and built things up slowly but came across a strange one today that I've not come across before. I fitted a new CU and the gas...
  3. Leesparkykent

    Faulty RCD

    Waiting in CEF just a moment ago for some gear and some lad brings in a Crabtree RCD in the box and hands it back to the bloke behind the jump and says 'this one is faulty just like the last one, test function button doesn't work and trips out when a load is connected to it can I have another...
  4. B

    hortsman economy 7 quartz system faulty

    Hi all and thanks in advance for any help. I live in a all electric flat and we have a hortsman econmy 7 quartz hot water system, recently the off peak immersion went and we have been stuck using the boost for a few days as and when we need hot water. we are in the middle of trying to contact...
  5. HappyHippyDad

    Most effective or correct way to fault find?

    Evening all... I'm in two minds whether to post this but i've thought about it for a while and was hopeing someone could give me a very clear idea of how they would find the fault. Lets say we have a ring. We test between N-E at the CU and find a poor IR reading, lets say 0Mohms, ie socket...
  6. S

    Faulty extractor fan

    Hi I fitted a Vent-Axia extractor fan a little while ago (about a couple of months if my memory serves me correctly). Now my customer informs me it has stopped working. It will of course be under warranty, but do I have any rights when it comes to getting Vent-Axia to pay for my time/call...
  7. Luminous

    Faulty functional test on RCD EICR

    Hi guys, what EICR code would you give a faulty 'functional test' on an RCD. Values all test fine at half,1× and 5× but nothing happening when i press the test button. Regards
  8. W

    Faulty garden spike lights GU10

    This is the third customer i have dealt with in the last year that has had spike lights installed in the garden, then within months they start tripping out rcds I have always expected water leakage first etc but every time it has been the black flex that supplies the light fitting it appears...
  9. Z

    Roof Blind motor faulty?

    I have been asked to repair a faulty roof blind. I have checked mains to the transformer, DC from the transformer to the switch and DC from the switch to the motor. The switch meters correctly when disconnected, ie. when pressed one way the contacts in a line become short and the other way...
  10. D

    suspected faulty 6.6kva transformer

    I think I have a faulty 66kva transformer but have little to no experience with them (delta star I believe) Call out due to reported problems from some of the tenants (offices that are rented within part of the building) some RCD protected ring final circuits disconnecting. Investigated at the...
  11. C

    faulty rcd

    At a job where using the shower trips the main rcd and two rcds under it (not on shower circuit). rcd test trips the lot at 1/2 current. When i isolate the main rcd from all circuits after it it fails to trip even at 5 x current. I suspect the main rcd to be at fault. can any one confirm this ...
  12. S

    Faulty light switch causes shower pump to start up

    Went to look at a job where the customer was complaining of his bathroom lights working intermittently and also that sometimes he was hearing ‘a loud noise like thunder’ when he turned his bathroom lights on. Found that the connection in the light switch was ropey, and when the switch is...
  13. G

    Calibrating voltage indicators

    Im getting everything setup for my part p assessment and am wondering if i need to get the voltage indicator calibrated, its the dilog combivolt 2. Ta.
  14. C

    Fault Finding?

    Alright, I recently sat my FICA and failed section E (Fault Diagnosis) and I have my resit next Monday but my problem is I've never actually done fault finding before. I've read about it and looked over some basic notes but my first real attempt at it was on the day of my test! I know that...
  15. S

    is my megger faulty?

    hi, i have a megger mft1552, purchased in 2008, has not been calibrated for a few years, its never been used for work, just a few home/family jobs and practice testing when i was going through college learning. Tried to use it for the first time in well over a year the other day and it seems to...
  16. F

    If an RCD fails to operate once, should it be considered faulty and replaced?

    I was doing some temp work as a mate, assisting a fully qualified sparks with testing, and an RCD failed to operate. He flipped it off and on, repeated the RCD test and it operated properly, then assured me it didn't need replacing. The fact it failed to operate under fault conditions once makes...
  17. D

    Electric Meter Faulty? Will I get a massive bill?!

    Hi Guys Just signed up to the forum to get a bit of advice on a problem I have with my electric meter (pay as you go/ keycard). I say problem however it's actually NOT. Until I end up receiving a HUGE bill. It started about a year and a half ago. One day I topped up my key card as usual after...
  18. M

    Immersun faulty, VO?

    hi all just want to check this set up. have 17th edition board (already installed) have main switch then a VO on one circuit (hold fire read rest), 2nd breaker immersion circuit. then first RCD unit which is fed via VO unit has half the house on it. then next rcd that has some sockets on...
  19. C

    megger 1552 faulty

    dropped my megger - about 2 ft -it worked ok after for 2 tests. noticed all the leds lit on top screen and would not switch off except by removing batteries. all internal fuses checked ok and all connections ok and no damage to pcbs. i am presuming this fault is not actually a fault but a...
  20. S

    Faulty storage heaters

    Hi folks Was called to three storage heaters which have stopped working (all storage heaters in property). Two of the connection units into which the heaters are wired have neons, and the customer says these light up when the storage supply is on over night (so problem is not with supply or...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock