I have a small utility room at the end of my garage, it have a fluorescent fitting for lighting controlled by an infra-red sensor. I decided to change it because the tubes and/or starters fall over at the most inconvenient namely winter time when it is dark.
I have changed the fitting to a...
Hey all, fairly new to this so bare with me,
i have an interview this week and Iam expecting a skills test does anyone have any idea what I could be facing? Or what you have experienced, the job is in a food processing factory.
ive heard rumours of having the wire a dol with pilz relay?
not...
Is there any way to find a DIN rail mount SPDT time relay with adjustable transition/changeover time. Need to automatically switch between two reversing contactors without mechanical interlock depending on the coast time of a relatively high inertia load.
It might be more cost-effective to use...
Recently had to work on Chinese plastics dryer with an overload relay wired in series with contactor latching circuit auxiliary contacts. When the overload trips you can still turn on the motor while the button is pressed. Why is that? It should be tight before the A1 or A2 terminal
I have seen...
Hello all,
First post here :)
i have a 2003 Jeep Grand Cherokee which I just bought and which I love. However it doesn't have auto lights, only auto rain (which is less useful!).
If I leave the headlights in dipped beam position and turn off the car ignition then after 5 min the car switches...
Hello and thanks for any advice offered. I've just joined so if I'm breaking any rules please forgive...
My issue relates to my Renault Trafic campervan. 1989.
I've incorporated two relays (one for dipped/one for main beam) into the headlight circuit to increase the light offered by my lamps...
Hello All
I'm currently wiring up an underfloor heating manifold to an s plan system.
the heating boiler takes its power off a ring main in a new loft.
All circuits in the split consumer unit are RCD protected.
I'm following the wiring diagram given in honey well wiring booklet ed 16. Page 14...
Good morning all.
I'm looking for a suitable solution to this problem.
I am installing a heating system in a property which is to be controlled zonally via the Honeywell evohome
Problem is that the relays for the evohome can only handle 5a maximum and one of the heaters is 1400w - almost 6a...
I am doing the electrics for an extension, part of which is to add a wet underfloor heating system.
The current heating is s-plan, the boiler has a pump overrun.
The plumber has put in a 2port valve and pump which feeds one zone on the UFH with a remote programmable theromstat.
The...
I have installed a couple lights on my truck and have a rocker switch set to both there is an inline fuse and a relay in each circuit. For my front light bar I had it working perfectly. i then re routed some wires to clean it up and connected it to the battery. No matter if the switch is on or...
As the title suggests, i'm looking to wire a float switch to a relay.
Here's what i have & what i know...
I have the following:
*12v float switch
*240v Eheim pump
*12v lugged power supply adaptor (input240v/output 12v)
*Relay 12vdc
So basically, i need the float switch to switch the the power...
A question, I fitted a 10 W LED on my new shed and wired it through a relay controlled by a remote, to allow her in doors to switch it on if she wanted to get something from the shed in the dark, problem is the LED flashes when it's switched on, I reckon the problem is too light a load, not had...
ok so what i am trying to do is.
12v led turns on when the door is open and turns off when the door is closed.
But my sensor does it backwards " when the door is open the light turns off and when the door is closed the light turns on... on my tester it shows closed circuit when the magnets...
Mike Blair
Thread
circuit
closed
door
doors
led
led light
light
magnetic
problem
relay
sensor
I came across this LINK on Wikipedia the other day, since then I’ve done some googling and found out this is a known fact that if relay hasn’t got a diode fitted, this might/will cause a spike and might damage something on the Elise S1 circuit.
I copy~pasted this form google
"Since an...
Hello, im looking for advice on a dorman smith sensel SRD earth leakage relay. I am doing an EICR on a caravan park, the Earthing system is TT and a sensel SRD relay fitted to load side of 200 amp main switch feeding various pillars. Relays have 4 settings from 30mA to 2000mA with time delay...
I'm wanting to switch a 24v boiler using 240v s plan system. I know I need to pass this through a relay but it's not a regular thing I do. Could anyone post relay type and a drawing please. Boilers 3 grand and don't want to blow it
Hi,
Have a general question here that's not in any way a loaded one, more out of curiosity as I always like to learn how things work. Such a thing would actually be impossible now because the switchboards are locked by the electrical company as well.
The builder of the house we live in now, in...
I have 2 relay switches to control switching between my Air Source Heat Pump and my Oil fired boiler. I want to mount them on rail within an enclosure similar to a Consumer unit housing. I am struggling to find a neat solution.
Any ideas?
Hi all,
I've just been to test a number of faults and have found a number of classrooms have relays on fluorescent lights? Can anyone think of a logical reason why someone would have installed them like this?
Thanks in advance.
Hi guys, need some advice.
Have a condensate pump to wire up. The pump has a safety switch cable (1 blue, 1 brown wire) that is to be wired into the 'permanent live' to a combi boiler. Therefore, if pump failure occurs, the combi will be shut down (as it condenses in both H and DHW).
The...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.