OP
pistolpete
Brought this up with Nic Eic engineer, they said if it meets sizing calculated by adiabatic equation note it on cert and notify customer recommended upgrade to main earthing conductor. Thanks for responses
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss 6mm main earthing conductor and main bonding conductors in the UK Electrical Forum area at ElectriciansForums.net
- Reaction score
- 5,382
hmm...
i`m sure i said that someware...
OP
pistolpete
Yep thanks. I thought I'd read it somewhere too but always good to get a second opinion.
- Reaction score
- 5,382
try post #2 pete..
Reply to 6mm main earthing conductor and main bonding conductors in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
This is a question (or discussion probably) regarding selecting the main earthing conductor, and subsequently the main equipotential bonding...
Hi there,
Just a quick question. Does a main protective bonding conductor require UV protection when run outside?
I am under the impression that...
Hello all,
I wonder if I can get some opinion on my deliberations on an old TPN installation with numerous 1P sub-boards wired up with 16mm T&E...
Hi,
I have a Victron Multiplus-II 5kVA inverter/charger with Pylontech US5000 batteries installed in my house along with a 6.8kWp PV array and...
This thread is in relation to the job at the farm I am thinking of taking on (3 phase thread).
At present the farm is all PME. I believe it needs...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Garo Entity ProThe Garo installation manual implies both the 'owner' and 'installer' need the app to complete...- Latest: Avo Mk8
-
Indesit oven error F53 code / no longer heating upDid you turn off the power to the oven for a long time? Comments on the web suggest that a...
- Latest: Avo Mk8
-
Does a SPD need a dedicated MCB?Some contain an RCD which are not mechanical they are PCB based and hence do not comply to BS7671.- Latest: westward10
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.