CT wiring diagram

[Stu1312]

The meter type won't make much difference as its the wiring on the ct side of the test block that needs to be installed, providing that is correct the meter operator will be responsible for all connections from test block to meter.

 

[Leesparkykent]

They could provide a diagram though.

 

[shanky887614]

Does that help?sorry picture hasn't uploaded will try again!

ive checked your pic, thats the wrong link, if you click on advanced, then img then browse to image it should upload.

if not can you upload to imgr or similar and link here

 

[Knobhead]

Page 90

http://eon-uk.com/downloads/EM_MoP_v1_0_1st_December_2008.pdf

 

[Leesparkykent]

DHES I've PM'd you.

 

[Stu1312]

Try again Upload the image directly to the thread

 

[DHES]

Page 90

http://eon-uk.com/downloads/EM_MoP_v1_0_1st_December_2008.pdf

Thanks Tony

 

[Knobhead]

Stu’s drawing will work, but they won’t accept two cores in a terminal block.

The whole idea of a test block is so things can be tested and isolated safely.

I’ve only worked on MV metering test blocks where the VT could be isolated by inserting insulated plugs on the voltage test block.

 

[Knobhead]

I use Red Yellow Blue Black simply because Brown Black Grey Blue can’t be seen on screen.

This is what EON will expect to see. G/Y is not used for the CT S2 connection to the test block.

 

[iwonder]

Hi guys, I have the exact same query and would like to see if there are any drawings for the connections.... all the links seem to be dead links.

Any help would be appreciated