pendent problems BIG TIME

[Ryan saint]

No mate were stripped back to the nuts

 

[pencilpusher]

April 1st??

 

[Engineer54]

when you think you've heard it all, along comes another wind-up (or a muppet).

- - - Updated - - -

so what was the volt drop calculation for 1.5mm?

What calculation!!! lol!!

 

[jonnyboy1]

Just screw the cooker to the ceiling and connect your 6mm into that

 

[Engineer54]

True story struggling like ****

You can say that again!! That's got to be the understatement of the day!!!

 

[HandySparks]

BS 7672:1993

Specification for compression, stiffness and labelling of anti-embolism hosiery

 

[Fast&Rough]

Snip some of the strands off lol

 

[decolad69]

Just first fixed a new lighting circuit it a domestic dwelling I've wired it in 6mm t&e to avoid any vd over the 20m circuit. Now here's the tricky bit how the hell do I second fix this into a pendent, I was thinking of cutting some strands of the cores, will this comply with bs7672?

Your problem is you real should have used 10mm t&e ! to avoide VD ........... ask the boys at ScrewFix if it comples with bs 7672.5

 

[telectrix]

should have gone to B&Q. step by step guide on DIY electrocution available there.

 

[Geordie Spark]

Your problem is you real should have used 10mm t&e ! to avoide VD ........... ask the boys at ScrewFix if it comples with bs 7672.5

If you're serious about wanting to avoid VD you need this: Condoms Home