Radial off a ring circuit

[Gringoking88]

Pete,

Cheers for the advice and I will try to gain access to the trainee section, Did you mean FCU, if so yes and no its not RCD protected.

Is the supply fed via a FSU? RCD protected? and a bit of advice gain access to the trainee section, you will get more help in there

 

[Andy78]

Read the post history!

Oh that one. I remember now. I'm out.

 

[Pete999]

Pete,

Cheers for the advice and I will try to gain access to the trainee section, Did you mean FCU, if so yes and no its not RCD protected.

Do you mean that there isn't any RCD protection at the CU? if that is the case the I would fit an RCD FCU at the point of connection of the SWA

 

[Gringoking88]

Andy,

I am registered as a domestic electrician with the NICEIC but am learning everything by reading and researching myself. I have completed my 17th edition, domestic installers course and building regs but am fully aware I don't have the experience or qualifications of more experienced sparks, hence why I might appear to ask silly questions. Yes I am "qualified / registered" but would still consider myself a trainee.

So, are you a DIYer or an electrician ? I'm still none the wiser.

 

[Gringoking88]

Pete,

Thanks for taking the time helping me out!

There is not RCD protection at the CU and I was going to add RCD protection but was thinking where the SWA terminates within the garage. I still dont understand this 6amp breaker thing though lol

Do you mean that there isn't any RCD protection at the CU? if that is the case the I would fit an RCD FCU at the point of connection of the SWA

 

[Pete999]

Pete,

Thanks for taking the time helping me out!

There is not RCD protection at the CU and I was going to add RCD protection but was thinking where the SWA terminates within the garage. I still dont understand this 6amp breaker thing though lol

Without having the benefit of seeing the actual job, it sounds like you have an SWA feeding some sockets of low loading in a garage. Feed into a a socket and take the supply to the lighting through a suitably sized fuse via a FCU from the socket. Providing you have the RCD at the start of the swa.

 

[Gringoking88]

I have what?

Without having the benefit of seeing the actual job, it sounds like you have

 

[Pete999]

I have what?

Not sure what happened there Mate see my later posts. Post 16

 

[Gringoking88]

Pete,

At present the SWA is being fed from a ring main, located in the main houses utility room and at present just taped up "to make safe" in the garage. What I need to do is add a garage CU in the garage incorporating RCD protection from this taped up SWA cable then I need to add 2x double sockets within the garage, 1 external double socket outside the garage and 1 garage light all from this existing 2.5 mm SWA cable. The need for RCD I get, its just why NICEIC said to use a 6amp breaker for the lights and a 6amp for the sockets thats the bit I dont get???? Cheers again also you mentioned about a mentor and I noticed on your profile "PROUD TO BE A MENTOR IN THE TRAINEE SECTION." what exactly is this and how does it work?

Not sure what happened there Mate see my later posts. Post 16

 

[Deleted member 9648]

Andy,

I am registered as a domestic electrician with the NICEIC but am learning everything by reading and researching myself. I have completed my 17th edition, domestic installers course and building regs but am fully aware I don't have the experience or qualifications of more experienced sparks, hence why I might appear to ask silly questions. Yes I am "qualified / registered" but would still consider myself a trainee.

......I cant help but wonder how many clients using an NICEIC domestic installer assume they are getting the real deal. No offence to the OP but personally I would feel conned if I found out my NICEIC approved DI was unsure about such a simple electrical job.