OP
pushrod
Much Better, Pushrod
Cheers Wayne, don't know what has been happening to my posts recently - mistakes all over the place , i couldn't even put two numbers in the calculator the other day
Discuss The testing required before cu change in the Australia area at ElectriciansForums.net
Share this page
Cheers Wayne, don't know what has been happening to my posts recently - mistakes all over the place , i couldn't even put two numbers in the calculator the other day
OP
JUD
That job at the in-laws has knocked you for 6 I think
Reply to The testing required before cu change in the Australia area at ElectriciansForums.net
Share this page
Similar Threads
I have been asked to change cu from old fuse board which has 6 fuses. Only 4 fuses are used. The first fuse feeds cooker circuit.
This is not used...
Hi All
New to this forum, have read the posts on here from google but only recently signed up. I'm having some issues and some input would be...
Hello All,
I am a homeowner (but not an electrician) and I am renovating a house that has an old CU containing MCBs and an MK LN5725 residual...
Please advise what I should test / check next.
My usual qualified electrician who did all of the work here is in Ireland for 4 weeks and not...
In my line of work it's very rare that I ever have to change a DB. I'm largely in maintenance; occasionally have to add new circuits etc. so in...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.