In a new build , I have noticed how the Sparks that have wired the house (4 bed 3 storey town house)
They have put the kitchen appliances sockets/kitchen worktop sockets/boiler fcu/1st floor sockets/2nd floor sockets on a 32A ring and the ground floor sockets only 4 sockets on another 32A ring...
For a laugh I went on line and completed the "Part P test" no I didn't do the course, did it just for fun, it seems to me that if the questions are similar to the ones I answered, yes I passed before anyone has a dig, cover more than just part P of these regulations.
To that end would it not be...
Is it my imagination or are we seeing a ridiculous number of threads with this kind of question? Sure, some are just trolling, but many of them look like genuine queries where people want to know a the number of the reg that says whether it's OK to install 2.5T+E clipped direct to some 4x2 to...
We have to rewire a house in Scotland in January, does anyone know if for notification we have to do as here in England (go through a organisation such as Niceic,Napit) or it is different there.your help would be much appreciated.
I've not been active as a sparky for a little while, so bit rusty on regs. Esp. the new ones :-)
Can anyone tell me if I should be worried about the sparky doing my kitchen?
This is the finished wiring.
Hi all. I'm not an electrician but would like some advice please.
The fuse board above is what is in our new property. A single old man lift there before us and only had few appliances.
We're now being told our house insurance will be void if we don't get it upgraded and it needs doing for...
Hi guys, been quoting for a lot of smoke detection upgrades for landlords. Had a look at a job today that has an open plan kitchen/living room, does anyone know what is required here? Going to have a google once the kids are in bed, just thought I'd ask the question!
Hi there.
Interested to know what anyone thinks about these plug-in solar power stations which are coming onto the market. These things are wired (via a Switched Fused Connection Unit) into the mains power supply. This system dispenses with the feed-in tariff and can apparently be installed...
Hi everyone,
I was asked to fix a messed up ring. The client doesn't want to tear apart everything and asked if it will comply with the regs if it is done like this - Let's say we have a ring with three points and a spur from each point. The point is that the three points on the ring will be...
I have an EIC from a customer for a domestic property, dated Dec 2005, which covers the installation of a new consumer unit, to bring the installation up to date (at per the regulations in force at that time, stated as 2001 amended to 2004).
There are two socket circuits, would you have...
Hello Fellow Sparks.
Can anyone tell me what they do with their old regs books. As I've got amendment 2&3. I have done my 17th with amendment 2 so it's got lots of regs highlighted and a few calculations written in the book.
I have also done I&T with it so it's got lots of extra info in.
Thanks
Hi guys, I have the above for sale, new & unused (regs still have the plastic covering on). £60 (plus postage) to a good home. Just pm me if interested.
Regards.
PS sorry for posting in the main forum, forgot there was a "For sale" sub forum!
Dears
Are RCBO used in 3 phase loads, and the other question is about using RCBO for loads located in hazardous area, is it an obligation or not
Regards
As title I have the new amendment 3 books for sale. I have given up on electrics so now these have to go. Not even used them yet.
Looking at £100 delivered for all 3.
thanks
morpheus75
Thread
17th edition
amendment
edition
for sale
guidance
guide
regs
regulations
sale
site plan
Morning all...
Managed to avoid taking the 17th for a couple of years but now have to take it!
I'm going to just do the exam only as I'm passing all the test papers but they are all related to the BRB, possibly earlier. Does anyone know (have some links) where I could find more recent past...
Good old AMD 3 hey lads,
So here's the situation.
Need to install floor sockets and related circuits including under floor busbars tap offs ect to office area with loads of PCs connected via work stations and monitors.
RCBO's at the dist board would be in keeping with AMD 3 regulations on socket...
:banghead:Hi all
Just a question on isolation on a control panel which has contactor and overload set up for a small pump.
When the main isolator is off parts of the auxilary side of the overload was found to be still live from another source.
Would this be covered by BS7671 or are there...
TailSpin
Thread
control
isolated
isolation
isolator
panel
question
regulations
supplies
Thought I’d write a little on changing from being a UK spark to a NZ spark, after seeing the Australian thread.
Kiwi licencing is ran by the EWRB (Electrical workers registration board) out of wellington. In order for them to assess your qualifications, you have to send them all copies of your...
SparkyJoe
Thread
arial
english
guide
including
new
new zealand
not uk
phase
regulations
sparky
start
hi new this would like some help would these qualifications allow entry to niceic, and allow you to sign of your own work. any help would be great.
Domestic Installer Course
- Logic Domestic installer certificate
- City and Guilds 17th Edition Wiring...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.