Series and Parallel

[Darkwood]

I disagree, a radial circuit can be defined, as a series circuit if only one load is connected, and a parallel circuit if multiple loads are connected.

Check my post 11... its already been covered and to correct you a circuit requires more than one load to be classed as series or parallel it isn't a term used for single load circuits, as its arguably both parallel and series.

 

[Moses]

Probably shouldn't have said what I did before so sorry if i offend but what's the point of posting a useless comment like that on here, it doesn't bring anything positive.

A venomous comment and not asked for and does not belong on this forum.

 

[Darkwood]

@Harry ... your opening post wasn't to forth giving with info hence i asked you myself for more guitarist simply stated what impression you gave with your post, you could have easily refuted it by correcting him and explaining exactly what area confused you, i myself recognised your confusion because my apprentices struggled in same area hence i spotted and replied to your satisfaction.
I would PM Guitarist at the very least and offer a private apology, yes his post may have not been very contributing to the thread but a response like that wasn't called for, ive been on here yrs and still dont know the regulars enough to pull a joke of that level on them... if thats how you intended it.

 

[DurhamSparky]

I disagree, a radial circuit can be defined, as a series circuit if only one load is connected, and a parallel circuit if multiple loads are connected.

always one clever tom dick and harry! :59:

 

[harryharman]

I have apologised to guitar and I'm also sorry to anyone on here that was offended by my poor taste joke. I'm new and don't want to get off to a bad start already!

 

[Moses]

always one clever tom dick and harry! :59:

am I write or wot?

- - - Updated - - -

I have apologised to guitar and I'm also sorry to anyone on here that was offended by my poor taste joke. I'm new and don't want to get off to a bad start already!

Accepted.

 

[DurhamSparky]

bad start duly noted...!!

 

[Guest123]

I have apologised to guitar and I'm also sorry to anyone on here that was offended by my poor taste joke. I'm new and don't want to get off to a bad start already!

You are very lucky I didn't see it before you edited it!!!

As you have seen the error of your ways & apologised we'll leave it there. Anymore contributions like that and your stay here will be a short one.

 

[DurhamSparky]

your not WRITE....!

 

[Moses]

your not WRITE....!

How?, may be i am missing something?

But

Before you comment, check post#2

 

[Darkwood]

No worries, if guitarist is Happy its forgotten and in the past

 

[DurhamSparky]

your missing the ability to spell RIGHT correctly!!! you can be WRITE as much as you like but it will hurt your hands and arm after a while!!

 

[cogsey133]

I wasn't offended by your poor taste joke Harry...i just felt there was a time and place for that style of humour. I am reading this thread with interest as i am learning something new here too Darkwood's comment "circuit requires more than one load to be classed as series or parallel it isn't a term used for single load circuits, as its arguably both parallel and series." I only see series and parallel in black and white terms ie: first week of first year stuff I have never really considered the possibility of a circuit being both series and parallel as Darkwood suggests.

We can all learn from this forum so i really felt wrong time, wrong place for that type of humour​

 

[ipf]

your not WRITE....!

But certainly wong

 

[Darkwood]

How?, may be i am missing something?

But

Before you comment, check post#2

Check your spelling moses he hi-lighted the word 'write'
Right!!!

 

[Darkwood]

I wasn't offended by your poor taste joke Harry...i just felt there was a time and place for that style of humour. I am reading this thread with interest as i am learning something new here too Darkwood's comment "circuit requires more than one load to be classed as series or parallel it isn't a term used for single load circuits, as its arguably both parallel and series." I only see series and parallel in black and white terms ie: first week of first year stuff I have never really considered the possibility of a circuit being both series and parallel as Darkwood suggests.

We can all learn from this forum so i really felt wrong time, wrong place for that type of humour​

Thanks for this and easy way to remember is series and parallel are a relative term between 2 or more loads (or other items in circuit) hence a single load cicuit can't be classed as either unless your reletive to another item or load in the circuit, light A is in series with the switch and in parallel with light B.... etc etc

 

[cogsey133]

Thanks for this and easy way to remember is series and parallel are a relative term between 2 or more loads (or other items in circuit) hence a single load cicuit can't be classed as either unless your reletive to another item or load in the circuit, light A is in series with the switch and in parallel with light B.... etc etc

I have been in this job for nearly 30 years now darkwood and may be on auto pilot because some things we just know and do. Its only when you start looking deeper into the theory that some things you have forgotten or hadn't realised or thought about in as long come to the forefront with some prompting from well informed people like yourself!

I guess that's why everyday is a school day

 

[ipf]

Thanks for this and easy way to remember is series and parallel are a relative term between 2 or more loads (or other items in circuit) hence a single load cicuit can't be classed as either unless your reletive to another item or load in the circuit, light A is in series with the switch and in parallel with light B.... etc etc

Or, basically speaking, how can something be 'in parallel' if there is nothing to be 'in parallel' with ?

 

[Guitarist]

My comment was more one of shock and concern for Harry that he was taking his 2391 shortly and nobody had taught him something which I consider a very basic concept...
Anyway, he has apologised for his comment regarding my Mother and I have accepted. No hard feelings.

Btw Harry, my Mother is 63

 

[Darkwood]

Btw Harry, my Mother is 63

Nice to see the Humour response and ive just done a ickle wee laughing at your last post, its a twist i hadn't considered or expected