-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Questions and electrical advice in the UK Electrical Forum - UK Electricians Forums > Electrical Forum for UK Electrical Rules, Regulations and UK Laws. Electrical Theories, Wiring Diagrams and More. DIY and Professional Electricians are Welcome..
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs
Forum Prefix Filter
Hi,
Just wondering if anyone can point me in the right direction.
I am a fully qualified Electrician and have been for some time, I am looking...
Recently we asked the forum who they used as their electrical suppliers the most. We asked for 3 or so options, and reasons why weren't mandatory...
Has anyone used the brand Fusebox before, how do people rate it as I’m just looking at there main switch spd board with RCBOs
We always use...
Hi, i have bought 3 lights for my garden, I've installed them on 3 upright posts and driled 1 hole through the back of the post for a cable to run...
what height do yous usually have your kitchen sockets, is it a set height or all depending on the kitchen thats being installed ?
Hi folks.
I cut one of the cables on my ring circuit, attached the 2 now separate ends to a new 30a junction box, and then run 2 additional spurs...
Recently had an extension done. Noticed electrician had run mains electrical cables right on to the hot feed from the boiler which gets very hot...
Hi,
whats the bets method of changing the wiring from a single ceiling rose to 4 downlights.
As it already wired switch feed! Im assuming we...
Tested a house recently and the hob was connected directly back to the board via 6mm. The cable appears to run down the wall (buried) and out...
Trying to wire up emergency lighting, for some reason, this doesn't turn on at all, even when power is isolated it does not come on, so ive added...
Was called to a pub today, to look at some LED down lights (small single LED's) built into a shelving unit. They flash rapidly on start up then...
hi guys,
Hoping for a little advice.
Been working on a property this week and have been having trouble getting zs readings as it trips the rcd on...
I have a customer who is currently having their garden renovated. They are having railway sleepers installed to make several levels in the garden...
Hi guys I use a fluke 1653 mft for testing at work. We work on mainly TT systems so when zs testing it is on no-trip. I don't have no...
Hi all. Got a bit of a problem. When we get heavy rain like we did today, the RCD trips. So i push it back on and sometimes it will stay there for...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
32 amp 3 phase socket, 300ma RCDThe potential issue I see is how is the installation in the portable shower block tested and the...
- Latest: UNG
-
Fitting bolt in fittingSome duct tape on the back of the plate to stop the bolt moving back or just epoxy resin the...
- Latest: UNG
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.