fire alarm

Recent contents Top users
  1. Bob Geldoff1234

    Fire alarm panel relocation problem

    Just been to look at a fire alarm job and would like your opinion on how you would do it. They want the fire alarm panel moving down the wall by about 3 foot. It would need to be mounted underneath the nurse call system as the care workers have to get on a chair to reset it. The wall is a...
  2. dlt27

    3 Storey HMO fire alarm and emergency lighting.

    Any info would be greatly appreciated. I have just rewired a HMO and have now been asked to do fire alarm and emergency lighting. I have wired both when working for previous company, but always followed drawings and never had anything to do with design. I started it today and after a bit of...
  3. G

    fire alarm system in flats??

    HI all, got 6 flat to wire soon but wondering on what if any sort of fire alarm protection to do basically its three rows of flats with one upstairs and one down, but three separate doors so it looks like three terrace houses , you open the door and immediately to your right is the door to...
  4. D

    INDUSTRIAL FIRE ALARM

    HI AGAIN ALL INSTALLING INDUSTRIAL FIRE ALARM FOR FIRST TIME. FOLLOWING INSTRUCTIONS BY MATE. CAN SOMEONE EXPLAIN HOW THEY WORK ? I THOUGH THEY HAD AN EOL RESISTOR TO GIVE A FIXED RESISTANCE VALUE THAT THE PANEL WOULD MONITOR. BUT WHEN INSTALLING HEAT DETECTORS EACH HEAD SEEMS TO HAVE A...
  5. H

    retrofit fire alarm to wired smoke detectors in home

    Hi Is this possible. I have wired in smoke detectors in each room in a 4 bed semi. However they are not loud enough and I worry in the event of a fire they will not wake anyone if they sound during the night. I'd like to retrofit a fire alarm to the system which sounds if any smoke detector...
  6. cliffed

    Sense alarm Fire alarm

    having probs with Fire alarm.Its a sense alarm 2 wire,mcp's,detectors & sounders. Goes into Fire mode,even when only 3 points are on circuit. Are all their sounders compatible with the system,it's difficult to understand properly ,we have sounders,which are alarm sense,not the sounder & base...
  7. cliffed

    Fp cabling to fire alarm

    Just a quickie,would you put compression glands on FP cables entering flushed ko boxes,or even round fast fix recess boxes,in ceiling.
  8. Ian1981

    Main supply to fire alarm panel

    what is everyone's opinion about fire alarm supply's to the main panel. Im of the understanding that the mains is part of the integral fire alarm system, thus should be of a different colour for identification to the other building wiring normally red. I have a colleague at work who disagrees...
  9. Brunel

    RECOMMENDATIONS FOR A TIME PERIOD FOR FIRE ALARM TEST

    I live in a block of 8 privately owned flats, the maintenance is carried out by a private company. We have a fire alarm system comprising of, smoke detectors, break glass call points, sounders and of course an alarm control panel. As far as I am aware a full test of the system has not been...
  10. cliffed

    fire alarm

    Just wondering how you guys are getting around installing fire alarm systems. We used to Cable & connect,with the older systems,analogue,now it's all addressable we can't strip out or reconnect new detectors without calling a specialist. They come along,charge what they want,after you've done...
  11. C

    Fire Alarm

    Evening, my company have become BAFE accredited and taken on some Fire Alarm testing and remedial work. I have been sent to install new sounders and detectors here and there. Whilst I'm ok with the wiring and installation and testing of these (all conventional and bi-wire) I don't have a good...
  12. J

    HMO Fire Alarm Recomendation

    I need to install a fire alarm system to a three storey building HMO. The council has specified an Automatic Fire Detection System to comply with British Standards 5839: Part 1 2013 and Part 6: 2013 and to provide Grade A, LD2 coverage. Floor plan attached. I have read that Fike systems are...
  13. S

    Fire alarm within public house with dwelling

    OK so while installing some cameras and aerials for a friend at their pub, I noticed some causes for concern... It was refurbed last year before they took on the lease, I noticed the old detectors changed for fike twinflex (which im sure I read the panels arent EN54 anymore) anyway today I asked...
  14. jengo22

    Fire Alarm systems

    If a fire alarm has been designed by fire risk management company. Can the system be installed by the electrician or do you need to be BAFE approved? We are in the process of carrying out the electrical installation within the premises. The system designed has Category M system for the...
  15. S

    Electrical contractor stuck between right and Fire alarm contractor perspective

    Hello all I'm new to this forum and have recently joined due to a lot of threads here have been quite interesting and many have very good answers from knowledgeable people. I've been sparking for 12 years and spent my apprenticeship with my fathers electrical company. My appretership was quite...
    • Sam cook
    • Thread
    • alarm battery between circuit company contractor electrical electrical contractor fire fire alarm lighting right stuck
    • Replies: 17
    • Forum: Commercial Electrical Advice
  16. T

    NAPIT Certification Scheme Napit course on emergency lighting and fire alarm systems

    I want to get competent within BS5266 (I think!) i.e. fire alarms and emergency lighting. I am thinking of doing the Napit course. Any opinions on the best way forward on this, or Napit course?
  17. L

    Fire Alarm Drawings

    Hi All just wondering how everyone completes their Design Drawings, As Fitted Drawings and zone plans for commercial Fire Alarm systems that you installed
  18. Baker1988

    Marking of fire alarm cables

    Hi just a quick question, I'm currently working installing fire cable for a fire alarm circuit in a warehouse and I have been pulling them in according to the drawing, it has smoke detectors and sounder bases and has some interfaces aswell for the roller doors (think so they close if there is...
  19. G

    Which certificate for domestic fire alarm

    Hi all, I have been asked to issue a certificate for 2 smoke alarms and a heat alarm that are connected via wireless bases (brk 700 series) which have already been installed by the client. I have never done this before but need to do so for building control as doors have been removed, hence...
  20. Leesparkykent

    kentec fire alarm

    What's peoples opinions on kentec fire alarm panels? I have an installation of about 80 points and been looking at this panel and Apollo XP95 range of devices. Any pitfalls, things I should look out for etc? Cheers

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock