Hi
Okay my powder coat oven i built was fine until today!
I had it working kept on for more than an hour etc
Pretty pleased with it all
2 x 2000w elements fitted and then wired into a 32a blue socket to the 42a isolator switch
But today its started tripping i looked insid emy control panel...
I have just replaced my electric cooker for gas and now have the lead for the ignition and clock training along the worktop to the cooker isolater on the wall.
I am capable of doing the following, but would like confirmation.
I cannot just cut off the plug and wire directly into the dedicated...
Hi
If this is in the wrong forum please feel free to move.
I need to have installed around 20 Zigbee Wireless Repeaters around a large property. They are 40mm x 40mm x 20mm and require a 230v supply, current is minimal.
I wondered if the following scenarios are feasible and acceptable within...
I bought a new MFT1710 a couple of weeks ago and got a free clamp meter with it. (UNI-T UT210B, 200A Mini Clamp Meter).
I finally got it out the box today and thought I'd try it on my mains tails to see if/how it's working. Surprisingly, with the consumer unit main-switch off, and the main...
upgrade to a 1940s ish installation mains busbar due to soldered joints failing on busbar isolator, 20 ish switched fuses of the same age on it. Large installation(hotel) that never closes and has alot of c1s on existing out of date certs but they want the mains upgrading 1st before the rest of...
Is there a safe and easy (but also precise) way to tell if two separate mains sockets are on the same circuit?
I need to know because I'm trying to use existing mains circuitry to create an ethernet network in a communal area of a multistorey block of flats, using Powerline Adapters...
Hi Guys,
New to the forum, so first post. I need to purchase one of these Mainslink 500 m wireless jobies as communications cable between boiler and central heating has been cut and instead of re-running the cable, this seems to do the job.
Has anyone used one of these Mainslink wireless...
Dear Electricians,
I am a veterinary surgeon and need help from someone in the know as to how to bring an old bit of equipment back to life. It is a headmounted lamp with a special mirror to allow examination of the retinas of dogs and cats, however my query relates to the power supply for the...
A fellow electrician wants to install a 100A isolator switch between the meter and cu. Is it correct that this also has to be metal as per 3rd ammendment. The wylex rec2 is plastic so does it need to be changed.
Of you could share your expertise please.
Hi, I was hoping someone could help me. I have recently brought a 3rd gen nest and installed it myself. I am currently using the usb stand however I want to mount the thermostat on the wall. I can't run cable from heatlink to thermostat, not possible. However in the kitchen near to a light...
so I have an porch wall light that is switched inside the house which has a separate PIR outside the porch. I am removing the PIR completely (as it no longer was switching the porch light on so assumed the pir was defective as the external floodlight on the same pir wiring (next paragraph) is...
Hello. I am extending my bathroom, but one of the walls that will be incorporated into the bathroom has a socket fitted. Is this allowed in a bathroom or is it best to remove the socket and fit a cover?
I'm upgrading an existing installation in my own house, and would like a second opinion please.
An existing sub-main, in a separate building about 10m from the supply is fed via four existing 16mm DI meter tail cables in cable tray and conduit. I inherited this installation from when the very...
Good afternoon all,
I have a client that is having works done on there front drive and the landscaper has stumbled across the mains supply cable 20cm or so in the ground.
Unfortunately the cable is too high up to be able to high up and needs to be moved down, I had advised my client to talk...
I'm starting a block of 15 flats Wednesday, the building is being converted from an old care home. The original wooden staircase is staying in place throughout in the communal area. I've just received a revised set of drawings which shows the mains room mostly situated under the staircase...
When I turn my oven on and touch a mains tester screwdriver against the casing it illuminates. It’s only happens when the heating element is on.
The oven heats well and shows no other signs of issues. The casing is clearly not properly live as it’s touched all the time.
Is this something to...
Hi All,
I'm living in a pretty dangerous situation - Please can you help?
A few months ago, the electricity in my first/second floor flat blew out, as did my neighbours. It turns out that there was a fault in a mains component under the stairs.
I had to get an electrician out late at night...
Hi guys,
We are replacing lamp post heads on a site and all is going well until we reached a set of 4 underneath 11/33kv pylons. We are getting a horrible ‘belt’ off the casing of the lamp post head. The post is coated so unable to receive a belt at low level. All we can think of is it’s the...
Hi all. I'm looking for some expert advice on the above. I am having an extension built and the footings are a raft slab which can be built/poured under the existing incoming mains cable (it's in a black pipe approx 50mm dia). There will be a suspended floor approximately 100mm above the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.