ring main

  1. D

    Single Pole Fused Spur From Ring Main

    I have two cables for wall lamps (1mm T+E) going to one of the socket in the back of the TV. These lamps will be controlled with smart bulbs with a little remote control or/and an app on the phone, no need of wall switch. I'm considering to use the 47mm double metal box to host a modular single...
  2. D

    Mapping existing ring main

    Hi, I am a first time DIY poster - hoping to navigate the tricky line between getting a bit of a steer in the right direction and not requesting step by step instruction. I am hoping to DIY the electrics on my extension, and in advance of the project I am trying to map the order of outlets on...
  3. D

    2 questions - Existing ring main mapping, and rules on spurs

    Hi Just getting started with a view to DIY electrics on my house extension in a few months time, and ideally would like to map out the current circuits so I can plan the best way to join up, or where new circuits may be required etc. 2 Questions I reckon I can do some DIY non-live testing of...
  4. B

    4mm spurred from ring main

    32A ring main, adding 2 more sockets off this, spark I’m working with says add radial 4mm to 2 new sockets from ring I’m saying extend ring? I know 4mm can take 32A but I wouldn’t do it his way
  5. M

    No L-L end to end on ring main

    Hi everyone hopefully someone can shed some light. I'm doing an inspection and test and upon testing my end to end for the live on a ring main I've found there is no end to end on the live. I've tested at sample socket and at the board. I got an r1 + r2 when interconnecting my lives and cpcs...
  6. R

    Use of 20AX switches in spurs off ring main

    I bought a number of 20AX grid switches with printed labels on them e.g. washing machine. These were to put an isolator above the work top for a 13A switched socket under the work top in the utility room. Electrician says no as the spur will be off a 32A ring the switch must be capable of the...
  7. E

    Splicing ring main to add some stuff

    Hi, planning to add some extra things for a new bathroom to a ring main which covers top floor of my house, does below look sensible (hopefully self explanatory)... Note all sockets/FCU's are outside the bathroom. Ring main to CU is on RCD 30amp. Any problems having a fused spur at 6m long...
  8. N

    Ring main become 2 radials

    Electrical ring circuit The electricalian came and did the second fix. But we werent sure if all the wires had been bought through the plaster board. All the sockets work, but we wanted to make sure there are no wires hiding in the walls.. we tested by disconnecting one of the 2 lives going...
  9. A

    Ring main consisting of only spurs

    Hi, this is my first time on this forum so I hope I'm in the correct section. I've come across a strange socket wiring set up in my own home. I was baffled at first as to how at the consumer unit I had a ring main set up (2x 2.5 T&E fused at 32A) but radial setup at each socket (1 cable). What...
  10. H

    Help with ring main please

    I have rewired a room with a ring main, all the plugs have been put on, there are 7 plugs in the room, I have put my tester plug in all the sockets and the 2 green lights come on saying everything is ok, but when I plug an appliance in and switch it on, it trips. Anyone any idea why?
  11. M

    Chasing ring main cable into wall - DIYer

    Hi We haves moved and new place has a bedroom with double plug socket in internal stud wall. There is a spur off this to another double socket which is mounted on (not in) adjoining wall but around a corner and about 3 metres away. However cable is protruding outside of side of first socket and...
  12. J

    Ring main MCB tripping, nothing plugged in.

    Hello everyone, Bit of a confusing one. I have a ring main on a 32A mcb. The MCB keeps tripping, sometimes the circuit will stay on for around half an hour then suddenly trip. This is still tripping with nothing plugged in. I have checked all sockets and made sure all connections are tight...
  13. T

    Ring main r1+r2 reading really low - 0.01?

    hi guys just wired up a new ring main for a house, confused on the test results though, firstly all other ring mains in the house that are new are okay and have came out as expected, tester has just been calibrated and batterys are okay and the ring main is a true ring... am using a metrel...
  14. A

    Electrician Jobs Job in Tameside, Manchester / Cheshire: New ring main & CU

    Hi, having got some useful advice and assistance from people on this forum I thought I'd put up the job here too. I'm looking to get a new Consumer Unit installed to replace my ancient one (pictured). I also want to increase the electrical capacity of my 1930's house by adding a new 32A ring...
  15. A

    Is EIC required for this job (New CU & ring main) Electrician says no?

    Hi, I've contacted an electrician to install a new consumer unit, as well as a new ring main into the loft. I asked if his quote included the appropriate certification, I assume an EIC, he said "as far as certification is concerned you don't need any as it's straight replacements", I checked my...
  16. J

    How can I tell if my garage is on the same ring main as my house?

    Hi, I'm Colin, a non-electrician here hoping for some knowledgeable advice. I've just moved into a house with a lovely double garage at the bottom of the garden. I'm trying to get wifi down there and the most suitable technology appears to be homeplugs piggybacking the signal over the...
  17. W

    Fused spur off ring main regulations

    hello I've seen the page at the back of the regs book but nothing explains can you - Have a spured socket off the ring using one cable and then put a fused spur after the spur and then feed additional sockets after the spir
  18. Electron

    Tripping RCD on new Ring Main

    I have installed a new ring main in a kitchen extension and tested for continuity and insulation resistance before connecting to Consumer Unit. As soon as main switch turned on, even with all the MCB's switched off, the RCD tripped. I removed all the connections to the consumer unit from the new...
  19. diyterry

    Lighting circuit from ring main

    I expect it's a big no no but is it permissable to create a new lighting circuit ( just for one light ) from a spur off a ring main?
  20. D

    Identifying ring main cables without a socket

    Hi, to give you a quick break down of my situation. I have a converted bungalow that has several generations of wiring and I'm currently trying to add an additional socket (via a junction box) to be located in a loft onto a ring main. Thankfully in my loft I have plenty of 2.5mm twin and earth...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock