Questions and electrical advice in the Solar PV Forum | Solar Panels Forum - All questions relating to Photovoltaic & Solar Panels in this forum, including feed-in tariffs, inverters, panels, calculations, schematics, installation, maintenance & fault finding. Solar panels forum. Solar forum. Solar talk. A photovoltaic system, also solar PV power system, or PV system, is a power system designed to supply usable solar power by means of photovoltaics..

Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs

I haven't fitted pv on a roof with pantiles yet but have a job coming up in a couple of weeks. What is recommended? The ones that slide under the...
Replies
1
Views
2K
S
Could someone help me clear something up please? On the NICEIC training - don't groan, I know it was rubbish - we were told to use to ac...
Replies
16
Views
8K
T
Hi All I’ve just completed my first install but need to commission it. This install is to be used for MCS assessment so I need to clarify a...
Replies
3
Views
3K
Part of the G83 Apprendix 3 commissioning form asks for the Generator Test Report (Appendix 4). This I assume is the test(s) done by the...
Replies
4
Views
4K
GreggElectrical
G
M
I am new to MCS, A customer want me to give a price to fit a 10 KW PV system to a flat roof ( 3 phase supply available). Is it better to fit 3 x...
Replies
10
Views
4K
beefheart
B
1
Hi, my first post so be gentle. Got my MCS inspection on the 24th March and I'm struggling with earthing the array frame. I have installed an SMA...
Replies
3
Views
2K
GreggElectrical
G
i have just been handed a sample of a handover package which i need to do to get mcs approved, but can people explain the one i list below, to...
Replies
3
Views
4K
GreggElectrical
G
i am going to finish my first pv installation tomorrow, and i have a question about the meter. so the way i have wired the pv panels from the...
Replies
11
Views
2K
Can anyone help me work this out? Most panels have a 5 year warranty on the panel yet have a 25 year warranty on the performance of the panel...
Replies
3
Views
3K
GreggElectrical
G
S
cheeky i know but does anyone have a blank handover certificate i dont know where to start !!!!! any advice needed
Replies
6
Views
8K
GreggElectrical
G
R
Hi, I'm looking for a sun path shading viewer thingy. I saw one a while ago which had a digital camera mount which seemed like a good idea but...
Replies
17
Views
6K
GenFlux Jim
G
D
looking at the possibility's of offering Solar as service to customers however!! i am a one man band with a part time worker and little in the...
Replies
11
Views
2K
Ramjam
R
T
DECC today announced the terms of the review of Feed in Tariffs for larger scale photovoltaic systems – those over 50kW. They propose that the...
Replies
5
Views
5K
eldsecny
E
S
We've just been asked to quote for an in-roof system - any advice????
Replies
4
Views
2K
S
G
OK. Need to get a quote to a customer tonight but hit a snag. The roof has a 15 degree pitch but table H2 doesn't have a radiation figure for...
Replies
2
Views
3K
GreggElectrical
G
S
Ok, I bit the bullet and bough PvSol, now I'm trying to design 2 systems on it - PC about to go out the window :mad: Can't figure out how to add...
Replies
9
Views
2K
C
We have not had any commercial projects yet but I have been asked by a family member about the fixing strategy to a modern commercial roof because...
Replies
8
Views
2K
confounded
C
Hi just fitted my first system for the mcs inspection and i'm not sure wether i need to bond the array frame. its on a bungalow and there's...
Replies
1
Views
1K
M
Hi We are currently MCS (three technologies ) and Part P with Elecsa. Our renewal date is within the first week of April 2011 and Elecsa want...
Replies
6
Views
4K
what is the next step i did the pv course about 4 months ago i have just finished my first installation what the next steps to get them...
Replies
1
Views
2K
United-Kingdom (1.16MW) A-SUNENERGY.COM Quality install - just look at all the inverters and DC switches! Dont ask me which panel isnt...
Replies
0
Views
989
S
kwe
Maybe I'm being a bit thick but what does kwe mean in terms of the amount of renewable energy installed? I'm looking at some stats for installs...
Replies
2
Views
3K
S
C
:o Scratch that. 4 pole.
Replies
0
Views
2K
claypole
C
E
Hi Guys, Just thought I would start this thread if anyone want's any advice or has any questions on the MCS Accreditation process. We are...
Replies
3
Views
3K
EasyMCSLtd
E
Hi Guys, We have an MCS assesment for thermal coming up. It is only for the specific thermal areas as we already have a pv accreditation. Just...
Replies
4
Views
2K
EasyMCSLtd
E
R
for doing solar paneling on a house do i need C&G 2372 or is it just good practice to have i like to keep learning more but its like £700 to get...
Replies
4
Views
2K
Kevin
K
M
What have people been using for their commissioning certificates? I have come across an example in the dti book but I wondered if anyone was...
Replies
13
Views
8K
T
Hi All, Just done my first day of my first install which will be used for assessment. Enjoyed it but have no knuckles left! I am using a...
Replies
9
Views
4K
M
Hi all, I'm sure this has been asked before and I've had a look on the forum but can't seem to find an answer. I'm just designing a 9.66kWp...
Replies
3
Views
2K
T
Hi All, I suspect this has been covered many times but I cannot find a definitive answer. I am undertaking my first install which will be used...
Replies
13
Views
4K
S
I am looking into MCS accreditation and am wondering about the meter. Do you need a digital or analogue meter? I have bought one off ebay but dont...
Replies
7
Views
2K
Von Vardo
V
T
This is a link to a panel cleaning solution YouTube - PvSpin - cleaning device for solar modules
Replies
1
Views
2K
Matt_M
M
P
can anyone confirm does the containment on the d/c side of the p.v installation need earthing as per norm.reason im asking is someone at work...
Replies
2
Views
3K
Phantasmagoric
P
i have been asked to quote a pv system, the easiest board is a submain which is fed by a 16mm cable which is big enough for the pv system i want...
Replies
2
Views
4K
M
Has anyone got any ideas what may be a simple way for a customer to determine whether a PV module has broken down in an installation of around...
Replies
5
Views
2K
we have been asked to quote for a 3.80kw pv system on a roof which is 60m away from the main distribution board, there is a sub main in the...
Replies
4
Views
4K
O
Installing on 3phase 4 strings of 10 pnls d/c isolator to each string, with sring fuses, how many a.c islators would i need, would i just need the...
Replies
2
Views
2K
E
Hi Guys, The DECC have just confirmed The Renewable Heat Incentive so thought this would be a good chance for everyone to throw any questions...
Replies
12
Views
3K
EasyMCSLtd
E
Hi I'm about to quote on a 10KWp system, which will be one of the first of my own as i am newly MCS accredited. I'm getting to grips with most of...
Replies
20
Views
6K
O
Where there isn't a spare way in a domestic CCU and you decide to go from the Henly block to a new garage CCU with an RCD and a single 16A MCB...
Replies
16
Views
9K
S
I've just been told by our local authority that we need planning permission for any agricultural/commercial buildings, that it doesn't come under...
Replies
14
Views
7K
S
S
I don't know if I'm being thick but I can't find the cost of commercial planning permission for solar panels. I've looked on the planning portal...
Replies
4
Views
3K
O
can anybody help i am fitting 9.8kwts solar pv i need to know what size d/c isolators i req and how many it's been put on a 3phase supply and in 4...
Replies
2
Views
2K
oddjob
O
hi i did the pv course 4 months ago, and i am starting my first installation next week 14 march 2011 i contacted the dno to check if there will...
Replies
4
Views
2K
Ive created this in Excell if it will help anyone - follow the link because the forum wont allow me to upload .xls extensions...
Replies
21
Views
7K
Ramjam
R
R
Please find a link to my Project Details spreadsheet. It is a utility that makes it easy to manage the pre-sales process and hopefully saves a lot...
Replies
0
Views
2K
Ramjam
R
N
Hi, Am I right in thinking that if I change the country to the the UK on set-up it will go to the correct defaults for this country, or do I...
Replies
0
Views
2K
Noddy67
N
R
Hi, I have a potential customer who want PV tiles. I know that they are expensive but I don't know where to get them from. Have you installed...
Replies
0
Views
1K
Ramjam
R
I have an install of a 4kW system for my mcs accreditation with 6 panels on a South facing roof and 11 panels facing east. I have two inverters...
Replies
8
Views
3K
H
Hi Any one installed any dimplex panels yet my wholesaler is pushing them. Seem good on paper. Sent from my HTC Desire using Tapatalk
Replies
3
Views
3K
Post a New Thread / Question

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock