-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Questions and electrical advice in the DIY Electrical Advice - This forum is for DIY electrical advice only. Do-It-Yourself electrical warriors are welcome in this DIY Electrics Forum. We have a few dedicated professional electricians willing to provide electrical advice to DIYers in here. Checkout THIS thread to see how you gain access to this private area of the forum..
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs
Search the forum,
I have the instruction manual for this programmer attached to a stand alone panel heater but what on earth do the pictograms mean where there is a...
Hi all, looking for some advice please. DIY and me are not the best of friends but needs must some times! I have to fit a light fitting to...
Need advice , My brother in law got a shock of the screws on the kitchen light switch. The kitchen ceiling has just been overboarded & skimmed...
Hi,
Not relating to any planned DIY, but something I've wondered about. When our house was rewired they used MK Logic Plus for everything. All...
im having my house renovated at the moment and seem to be getting lots of probs with various workmen, the latest being electricians , they have...
I have a DC 24v Fan, which at full load uses around 7Amps.
I brought a DC 24v 13A PSU Driver, which when i first tested the fan powered it just...
Hi all,
I have recently moved house and discovered a double socket in the living room doesn't seem to work.
I have taken the faceplate off the...
Hello
As the title says... ;)
I'm thinking about having a 1.8A 400V bushed fixed speed drill, mounted in a press, connected to a dimmer switch...
I want to try the method below to release my car door deadlock. I have access to the door lock module and have identified the two pins but have...
Hi all,
I am trying to change my honeywell analog thermostat with a wireless thermostat .
My current thermostat is
T6360 Room Thermostat -...
Hi all. We’re moving into a new build home in a few weeks and the one thing that’s bugging us is the location of the fuse box. It’s 1400mm from...
Hi all,
I’m new here so thanks in advance.
I have removed a single phase 2.2kw motor from a compressor in order to put it on a table saw.
The...
Hi,
So bought my self a Nest and plan to give a go at instaling it over the weekend.
I whiped open my currently installed digital programer and...
Hi,
I am in the process of setting up a diesel heater to warm our conservatory and need to provide 12v power to it. I have purchased a CCTV...
Hi All
I moved into a new property last year which was fitted with an accenta g3 house alarm however the previous owner damaged the panel and it...
Hi, I was hoping someone could help me. I have recently brought a 3rd gen nest and installed it myself. I am currently using the usb stand however...
There are lots of discussions on forums about what is and isn’t Part P notifiable work. Everything I have done on the past or would want to do in...
Hi all
Hoping someone might be able to give me steer..
I have purchased a commercial convection oven with a three phase plug. I'd like to switch...
Hi I am seeking some advice. We rent our property and it was discovered by a British Gas engineer 2 days ago that the property is not earthed. He...
Hello.
Im an enthusiastic diy'er and whilst finishing off a job that a local sparky came to do, i came across this 'fault' that i find a bit...
Hi there,
Let me start by saying that the picture is not my work! I regard myself as a reasonably competent DIY'er - probably as competent as one...
I got an electrician in to change my shower fuse from a 32A to a 40A for an 8.5kw shower that's running on a 6mm wire. I'm hopping the live wire...
Hi All,
I hope you are doing well.
I keep having the issue with this pull cord switch to the power shower.
I used a number of pull cord...
My house has a self-contained basement on the bottom floor which has its own fuse box and alarm system. However the fuse boxes and alarm control...
Hi experts
I'm trying to get my Ring Video Doorbell Pro to work with my Byron 776 chime.
This was working fine for 3 months but now I'm getting...
I'm having issues with the new Blink doorbell that I Installed today.
Basically, unless the doorbell is wired, it will default to a VERY basic...
Hello,
We moved into an old house (Wimpy 1957) and the doorbell doesn't work.
I read the AC voltage on the old Friedland 752 transformer, and...
Hi All,
I would be extremely grateful for advice/comments on the following :
My old built-under hard-wired oven died and due to space constraints...
Hi, what type/size of wire will I need for 6 36W led batten lights in my garage?
Would 2 core 0.75mm round flex wire be ok?
Hi,
Hoping that someone can advise before we go ahead and instruct a qualified electrician to carry out this job.
We currently have a white...
Hi everyone,
I was wondering if someone could explain to me how I would go about, and what I would need to wire a 3 pin UK mains plug to a...
As per title really. I’m considering buying Nest thermostats, I am confident I can install it appropriately but I don’t know if legally I’m...
We've recently brought a new build house and it's come with an AEG induction hob. We quickly realised there wasn't enough power to heat more than...
Hi
I want to install a Solar IBoost+ on my Megaflow 300I cylinder, is it possible on this cylinder?
I'm a qualified mechanic but always tackled small electrical jobs without incident. wonder if i can get some advice re a 60's potters wheel.
it...
I also have a hottub mines the lay-z-spa paris specs say voltage 220-240V ~ 50Hz, 2050W at 20°C.
I fixed the melted plug my fault used on a thick...
Am about to install an induction hob and can either use single phase or three phase. Will use singles in conduit. Maximun load is 11Kw so either...
Hello all,
I have been getting a lot of advice and tips from this site, so thank you.
I am interested in restoring old lights and lamps and...
Hi,
I'm trying to find a timer control, or smart switch for a 32A circuit. It is for a hot tub which is expensive to run. I want the hot tub to...
Hi,
I have a fault somewhere on my immersion heater circuit, the 13A fused spur switch is getting hot & there is visible insulation damage to...
Dear all (I don't have access to the DIY section)
I have bought myself a new cooker ( Beko BD533A )
This cooker is pretty easy to install if I...
Replacing bathroom fan with xpelair VX100 standard fan
Which colour wires go into what? Have L, N, T (although not a timer fan so presume I...
Hi folks, I'm in the process of adding some more sockets into my "Socket" ring circuit. My plan was to open up the existing socket, cut 1 twin and...
Hi guys I bought this motion sensor from lidl thinking that I will add to my floodlight and it will become my outdoor sensor light but can anyone...
Hi everybody I would like some advice on the height sockets in a summer house am I right to say they need to be 450mm from ground cheers Paul
My consumer unit is in my garage and the cables (approx 12 cables - 10 circuits) go through the ceiling. There is a huge hole where the cables are...
Hi all
need advice for bradbury 2 post lift
1 what should be the diameter of the cable, cable will be 25m long from lift to box
2 what should be...
Hello all! Probably a noob question, but really appreciate your help with this. I am trying to fit a ceiling light and need to get out the...
I am trying to replace a switched light fitting that is in a cupboard with a new ceiling rose. When I took off the existing fitting, I can't work...
Hello,
I had a 2 wire doorbell transformer that I needed to upgrade in order for my Ring Pro to work correctly. The old transformer had 2 black...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Does a SPD need a dedicated MCB?Absolutely. I have a 75 kWh Citroën ë-Dispatch. Great van.- Latest: Risteard
-
Unreasonably high invoice bill from an electricianThis is precisely the issue. I had the HSE out with me a number of years ago to offer advice...
- Latest: Risteard
-
What is it called IR testing?One has probably licensed one from the other. All my fibre splicers are Japanese, either...- Latest: KungFuTurkeyLeg
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.